bart simpson

D16y7 bottom end with this head?

Upon trying to find a distributor, nothing seemed to fit in between the cam cap. An ex one fit, but a dx didn't. Looking to verify what the heck cylinder head I have on my car. Been driving it for 3 years now haha.


Thanks again!!!

itsnotfast

I've done a little searching and I couldn't find a P2A-7 but I did find P2A-8, 9, and 10. If it's along that same series, it looks to be a non vtec ZC head.

itsnotfast

What happened to the distributor that came out of the car? If it's an OEM dizzy there should be a part number stamped in the side of one of the ears at the base of the dizzy. You could try searching it that way. If you find a number post it up and I'll try to look into it more. If you still have that dizzy you could try to rebuild it.

jbpnoman

It's a non-vtec D15B head. Looks like the only USDM car that motor came in was the (rare) 1988 CRX 1.5X. Now you know.

bart simpson

Really!? Also I will take a peak at the distributor part number but I don't think it is oem

1dirtyeg4me

I have that head on my jdm d15b my d15b7 usdm dist fit right on it.