h22accord101

got a question i got a 97 dx civic and i am swapping a obd2 ls swap in it and i am doing a obd2 to obd1 conversion using a p06. do i have to do anything to the wireharness or do i just plug everything up as normal ive heard of people rewireing the dizzy to a obd1 just lmk if you got any info thanks

HondaPartsHero

1. You are going to have to wire the 3 wire IACV to 2 wire
http://www.ff-squad.com/tech/wiring/wiring.96-98.jpg

2. Your intake air temperature sensor is square, the LS is round. So you will either rewire the connector to the round style or do this:
http://farm3.static.flickr.com/2144/...c4d3f0c1_b.jpg

3. Extend the primary O2 using an O2 extension harness

h22accord101

dne changed the iacv and extended the o2 but ima proable be running a chipped p06 so not really worry bout 02 ill have to check the air intake temp out havent changed it

h22accord101

is the air intake temp sensor on the manifold itself

HondaPartsHero

On the DX its in the air box



On the LS its on the intake manifold


sensor on 4th runner

h22accord101

pk thanks guess ill change it tomm be4 hopefully putting the swap in

h22accord101

on the iat will the wire colors on the plug match cause on the dx harness there 2 black plugs i am guessing one goes to iat and one goes to the sensor on top of the ls manifold but idk which one goes to which,

h22accord101

i cut the plug of the teg harness that goes to the iac will the colors on it match the dx harness the teg harness is also obd2

mr.ef4dr

just dropped a h23a into a 00 accord temp sensor doesn't work also need the pin out for the vss

ray ray ray ray

do you have pictures the obd2 IAT pigtail?

HondaPartsHero

do you need pics of the front or back?