B18B-TURBO

I have a 93 cx hatch. I just recently swap a d16z6 into my hatch and I put in a new ACT 6 puck clutch sprung ones using stock cx pressureplate and flywheel.

Anyways problem im having is that whenever I shift into first gear or any gear i have to step down on the clutch half way and if I step down on the clutch pedal all the way it wouldn't go in. When I take off on firt gear I have to let go of the clutch pedal almost all the way for the car to start moving. Also when im in any gear and I step down on the clutch pedal all the way down it wouldn't let me out of gear also.

What do you think it is?

I think it could be the stock cx pressure plat im using or that I need to adjust my clutch pedal.


HELP PLEASE!!!

hatchi

try adjusting your clutch pedal first

Andres-eh2

Did you bleed the clutch?
Check your fluid levels
Honestly i dont think your using the right pressure plate for obvious reasons

B18B-TURBO

Thanks but need more suggestion!!! BUMP

Kamin

seriously
why did you use a stock pressure plate with a 6 puck, i dont think it has the clamping power for a 6 puck.

B18B-TURBO

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kamin &raquo;</TD></TR><TR><TD CLASS="quote">seriously
why did you use a stock pressure plate with a 6 puck, i dont think it has the clamping power for a 6 puck. </TD></TR></TABLE>

Money issue not all of us are rich. I try to use what I have. DAMN should of done it the right way the first time

tripwire1212000

doing things the right way is a lesson some have to learn the hard way... I would first go and get the correct pressure plate, next I would double check your lines and make sure they are bleed, autozone has a one man bleeder for like 3 bucks. if all that doesn't work go to the pedal adjustment...

snatch

I would agree with the pressure plate issue. Using a stock CX PP with a 6-puck clutch sounds like a bad idea to me.

oreozzz

yea that pressure plate is probably the problem and if its not that try adjusting

B18B-TURBO

So what I did so far is bleed the clutch and adj the gas pedal and still doesn't do anything.

So im guessing it's the pressure plate.

What do you guys think?

snatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18B-TURBO &raquo;</TD></TR><TR><TD CLASS="quote">So what I did so far is bleed the clutch and adj the gas pedal and still doesn't do anything.

So im guessing it's the pressure plate.

What do you guys think?</TD></TR></TABLE>

Do you mean adjust the clutch pedal?

I would check the pressure plate next. Sounds like you've done everything else possible. I guess you could make sure to check the master cylinder and slave cylinder. Good luck.