MagicJ_2000cx

i could search internet for answer but i wanna be 100 percent im getting the right part im swapping on sir civic rear disc and do i need to change entrie rear line or just the little ruber hoes at the end to sir line cause i know i gotta chage brakes just dont wanna do more then i have to thanks

EsotericImage

iTrader: (8)

Its easier to swap the whole trailing arm and replace the bushings while theyre out.

Bob Dole!

I assume you're talking about brake lines? You don't need to replace the hardline, only the rubber soft lines from the body to the rear calipers.

eHMxhACk

iTrader: (17)

You'll also need the four small washer that go on either side of the banjo bolts. Two washers for each bolt, one bolt per side.





eH.

MagicJ_2000cx

can u show pics for reference where can i get brake lines

Bob Dole!

http://www.hondaautomotiveparts.com/...y5=BRAKE+LINES

You need numbers 20, 21, 28, 29.

Does your brake swap come with a prop. valve? Because you'll need that too. (No. 4)

I assume you're swapping the entire trailing arms?

eHMxhACk

iTrader: (17)

You don't need to order 21, because 28 and 29 included 21. But you will need to order two 20s.





eH.

Bob Dole!

Good catch