93slmdcvcsi

check this out people, i just got a 92 cx with a JDM b16A. The problem is that the car won't rev over 3500. The harness looks rough, and i am not sure what Dizzy to use for this vehicle. I am used to working on EF's, but for $2500 I couldn't turn it down. ya know. I would appreciate all the help that i can get! Thanx

93slmdcvcsi

someone has to know something.
bump

delScho

Sounds like it is in limp home mode. What codes are you getting? You should be getting at least one (but maybe more) with a jacked up harness. If you aren't getting any, I'd check to see that the MIL actually comes on and is connected properly. I've seen bad swaps where people just clipped the MIL lead from the ecu to hide their stupidity. You might have the same issue. Just a thought.

93slmdcvcsi

it is throwing a few codes, but i am not sure right at the moment but i will check and post them up. How can you get it out of limp mode?

delScho

Fix the source of the codes and reset the ecu. It's a programmed defense mechanism, you can't just make it go away.

93slmdcvcsi

Is there a site where I can get a list of the OBD-1 Ecu Codes?

93slmdcvcsi

Also another ? Can i use a complete 92-95 ex harness( motor + ecu ) on a cx chasis? Will it work with my b16?

93slmdcvcsi

bump nees some help guys

93slmdcvcsi

bump

ShakesTheKlown

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89cvchb &raquo;</TD></TR><TR><TD CLASS="quote">Is there a site where I can get a list of the OBD-1 Ecu Codes?</TD></TR></TABLE>

Look at the very top of the EG+ Civic / Del Sol forum...

For ****'s sakes...

93slmdcvcsi

I hav still yet to get an answer about using a full EX harness on a CX chasis with a b16! Will that harness work and what will i hav to do to make it work?