My little white hatch build
#101
Re: My little white hatch build
nice car. just picked up a 92 "little white hatch" soon to be black though. thanks for your service. going a bit different direction than you engine wise, but you got a nice one
#103
Honda-Tech Member
#108
Re: My little white hatch build
hey man, my buddy has a 92 hatch with a d15 swap and y8 with p28 computer. car runs like ***** and wont idle smoothly at all. i was wondering if you could tell me what harness you have on this car. his also does not have the IAT in the intake runner like yours. his is out in the tube before the throttle body. i doubt that is correct so im trying to figure out how to help him fix it. thanks
#109
Honda-Tech Member
#110
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: CO
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Re: My little white hatch build
hey man, my buddy has a 92 hatch with a d15 swap and y8 with p28 computer. car runs like ***** and wont idle smoothly at all. i was wondering if you could tell me what harness you have on this car. his also does not have the IAT in the intake runner like yours. his is out in the tube before the throttle body. i doubt that is correct so im trying to figure out how to help him fix it. thanks
The IAT was in the intake tube before. I dont have pics but it had the factory Y8 intake tube with the sensor before the throttle body. I am using the Skunk2 intake manifold thats why it was relocated into the intake. You can use a Z6 intake manifold and it mounts in the manifold. The only issue I have with the Skunk2 is clearance. The IACV is almost kissing the proportioning valve. Either manifold will work for you.
#116
#118
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: CO
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Re: My little white hatch build
So my car was making this loud noise from the back and thinking my rotors were warped. Comes to find out that my rear hub assy was bad. Took of the cap off the hug and was full of metal shavings. Didn't take to many pics of the tear down cause it was getting late last night and was rushing before dark to get it disassembled.
Before
All apart
The culprit behind the problem.
New hub
Studs out
Extended wheel studs in and remounted
All done. This thing is so much quieter now. I can actually enjoy the radio at high way speeds.
A quick pic
Also got around to installing my COBB intake on the wrx.
Before
All apart
The culprit behind the problem.
New hub
Studs out
Extended wheel studs in and remounted
All done. This thing is so much quieter now. I can actually enjoy the radio at high way speeds.
A quick pic
Also got around to installing my COBB intake on the wrx.
#121
Honda-Tech Member
#125
Re: My little white hatch build
Damn it this thread actually gives me motivation to work in my bone stock CX as well. Your car is pretty much where I'd like mine to be.