mongoliandonuts

Does anyone have the ignition wire diagram for the ignition switch on a 1994 honda del sol si. there are 5 wires.

black/yellow
yellow
white
black/white
black


can anyone help me figure these out my switch was removed and stolen and now i need to get my car running.

Deemeetree

From the Chilton's Manual...if I'm read this correctly, seems like this:

BLACK/WHITE goes from the IGNITION SWITCH to a STARTER CUT RELAY which leads to the STARTER SOLENOID.

Now the BLACK/YELLOW goes from the IGNITION SWITCH to FUSE 12 (15A) to an UNDER DASH FUSE/RELAY BOX to a WHITE/BLUE that goes to the ALTERNATOR.

Another BLACK/YELLOW goes from the IGNITION SWITCH to FUSE 24 (15A) to a CHARGE INDICATOR to a WHITE/BLUE to the ALTERNATOR.

WHITE goes from the IGNITION SWITCH to a WHITE/BLACK into FUSE 39 (50A) into an ELECTRONIC LOAD DETECTOR which TWO (2) WHITE come out. ONE (1) for the ALTERNATOR and ONE (1) to FUSE 41 (80A) which then goes to the POSITIVE (+) on the BATTERY.

There is another BLACK/YELLOW on the BATTERY, it is the GROUND (-).