How do you do CEL circuit test on eg civic cluster?s
09-15-2012, 10:59 AM
#51
Re: How do you do CEL circuit test on eg civic cluster?s
Looks similar but not identical to the EG cluster below. Maybe your car's cluster connector pin outs are different from your cluster's pin out. Are your CEL and other bulbs in the same location? What does your other cluster look like? Post a picture.
09-15-2012, 11:02 AM
#52
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Virginia Beach
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
09-15-2012, 11:07 AM
#53
Re: How do you do CEL circuit test on eg civic cluster?s
I'm trying to figure out whether your cluster connectors and cluster have different pin outs and this is the cause of the problem.
Do the your cluster's CEL power and ground wires pin to A3 and A6?
09-17-2012, 03:45 AM
#55
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Virginia Beach
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you do CEL circuit test on eg civic cluster?s
I studied the diagrams you showed me The only difference I an tell is mine has an extra illumination light next the the abs light.
Here's the picture of the cluster without the tach. I studied the diagram and it looks the same to me.
And yes, that's yellow paint on the actual circuit, going over the copper circuit that goes to A3. But i don't think that would affect it much since both the speedometer and the CEL don't work for either cluster.
Here's the picture of the cluster without the tach. I studied the diagram and it looks the same to me.
And yes, that's yellow paint on the actual circuit, going over the copper circuit that goes to A3. But i don't think that would affect it much since both the speedometer and the CEL don't work for either cluster.
09-17-2012, 07:15 AM
#56
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Virginia Beach
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you do CEL circuit test on eg civic cluster?s
I found a cluster at the junkyard (one with a tach) but its for an automatic, could I transfer the copper circuit over to my cluster or would that not work?
09-19-2012, 08:50 AM
#58
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Virginia Beach
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you do CEL circuit test on eg civic cluster?s
Bump again, I found a new troubleshooting guide but all it did was confirm my ecu was good.
09-20-2012, 04:01 AM
#59
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Virginia Beach
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you do CEL circuit test on eg civic cluster?s
Another bump, If I can't get this figured out by the weekend I'm just going to take it somewhere.
09-26-2012, 01:20 PM
#62
Re: How do you do CEL circuit test on eg civic cluster?s
Test for continuity between:
-A3 and one side of CEL socket
-A6 and other side of CEL socket
09-27-2012, 04:56 AM
#63
Honda-Tech Member
Thread Starter
Join Date: Jan 2010
Location: Virginia Beach
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you do CEL circuit test on eg civic cluster?s
I have no continuity on either side for both a3 and a6. Guess I need a new cluster?
09-27-2012, 06:15 AM
#64
Thread
Thread Starter
Forum
Replies
Last Post
crazyjetsfan22
Honda Civic / Del Sol (1992 - 2000)
3
01-12-2008 08:54 PM
Lucky-13
Honda CRX / EF Civic (1988 - 1991)
8
12-20-2007 01:19 PM
b18bcrxhf
Honda Civic / Del Sol (1992 - 2000)
3
12-31-2006 11:13 AM