How to adjust the a/c belt tension
#1
Thread Starter
Join Date: Jun 2007
Location: buena park, ca, 90621
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
How to adjust the a/c belt tension
Hey well I have a problem with my D16Y8 it makes a noise when I turn on the A/C in my 00 EK EX so I'm guessing is my ac belt how do I tighten it up can you guys help? TNX
#2
Re: How to adjust the a/c belt tension (joeEK00EX)
The noise you are hearing is not a growl, right? If it is, it may be a bad A/C Idler Pulley Bearing. Here is a TSB:
http://www.tegger.com/hondafaq...e.pdf
But, to answer your question on how to adjust the A/C belt tension:
(Use the image in the TSB as a guide, so you know which is the pulley center nut, and which is the adjusting bolt.)
1. Loosen the center nut on the pulley (Loosen, don't remove).
2. Turn the adjusting bolt to get proper tension.
3. Re-tighten the center nut on the pulley.
http://www.tegger.com/hondafaq...e.pdf
But, to answer your question on how to adjust the A/C belt tension:
(Use the image in the TSB as a guide, so you know which is the pulley center nut, and which is the adjusting bolt.)
1. Loosen the center nut on the pulley (Loosen, don't remove).
2. Turn the adjusting bolt to get proper tension.
3. Re-tighten the center nut on the pulley.
Thread
Thread Starter
Forum
Replies
Last Post
danno33
Tech / Misc
3
01-28-2013 04:18 PM
zx92027xz
Honda Civic / Del Sol (1992 - 2000)
2
08-22-2010 07:51 PM
civic=goodgasmileage
Honda Civic (2001 - 2005)
5
06-06-2010 08:39 PM