mister_ej2

alright so a friend and I just did an automatic to manual swap and the only thing that was left from the automatic was the steering column and mount bracket.....

switched over interior harness's from manual car...same model (DX)

the car is finally complete and when we go to turn the lights on...both blinker indicators are on (like when hazards are on) in front and rear of car...

when the lights are off the blinkers work but blinks just like hazard button is turned on but isn't....when the blinkers are on the corners, back signals, gauge cluster, and climate control all blink

we have switched out light switches from another steering column and even whole steering columns with the other light switch....

i hope this isnt THAT confusing lol...but please any help would be appreciated

mister_ej2

also no wires were cut on the manual harness or steering column or anywhere

mister_ej2

and now the car will not start what a great way to start the day off...bump