chewiejdh

As the title says above...I can't seem to find any reputable shops around the Winston-Salem / Greensboro area. I was wondering if anyone knew of a place that does quality work in NC?

chewiejdh

Is there no one on these boards that has any clue about a decent shop in NC? Are we that far away from everything?

Ricey McRicerton

Depending on what you want done, I'll do it. There are very few shops in NC worth a half a **** (with P1 the only one I know of being worth anything).

tz-devil77

I work at japan direct. We dont work on cars here but we sell quite a few engines and trans to monster motorsports in winston! And then there is always phantasm in raleigh. I have not had my car worked on by either one just throwing out names.

Ricey McRicerton

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tz-devil77 &raquo;</TD></TR><TR><TD CLASS="quote">I work at japan direct. We dont work on cars here but we sell quite a few engines and trans to monster motorsports in winston! And then there is always phantasm in raleigh. I have not had my car worked on by either one just throwing out names.</TD></TR></TABLE>

Ahh...Japan direct! Yeah, I was just over there a couple of weeks ago with Mike (the guy who bought the JDM ITR front clip). Very cool place. Phantasm is overpriced IMHO and I have never heard of the other place.

chewiejdh

well, I drive by Monster Motorsports everyday. I don't really know anything about them. My biggest fear is leaving my car with some "fly-by-night" tuners that really don't understand what they're doing. I'm only looking for someone/someplace that can do some work that I don't feel comfortable doing myself. I'm not that expirienced when it comes to dealing with engine work so I don't really know how much I can do myself.

Ricey McRicerton

Honestly, if you have questions, search on here, and if you can't find what you need ask. If you aern't planning to tear your motor down and rebuild it you can do damn near anything on these cars with a very limited selection of tools.

chewiejdh

Oh trust me, I've learned alot from this site. I may only have 40 posts or so, but it's because most of my questions have been answered. I'm not planning on breaking into the block, but I have thought about attempting to install a cam myself. It's just I was wondering if there were any shops out there that could do something like getting into the block if I wanted to later on.

00MRSi

P1 Auto. Jack's brother Willard is also very good. He is in Charlotte..

chewiejdh

i've never even heard of P1 auto. I'll look at their website, since this is twice they've been mentioned. Thanks for the info!

hondaracing1

Theres a good place around here i dont got no experience with but lots of my firends do, its called RPM im in jacksonville nc

TomC

Jacksonville will be your best bet , HP Imports or East Coast Performance are the only 2 places I would trust my car in this Area ...... http://performancefreaks.com &lt;-- <U>Alot</U> of fokes from nc on this fourm although its not all honda

6SPD_EK

iTrader: (2)

http://www.hondaraceengines.com (RLZ Engineering) BRAD Z is the man (MAX_CFM on HT)...check out this old vid of his full interior all motor Si that runs in the 12's http://www.videobookmark.net/H...m.mpg (LS vtec - stock sleeves....mostly head work, custom cams, etc...)

his shop is running specials on rebuilding blocks - not too mention his P&P work is unbelievable

from what I have heard & read (nothing but good) thats the place to go (hell I have put alot of thought into having him do work for me & I am in upstate NY )

hondaracing1

hp imports does alright work i guess from what ive heard, my friend craig said they messed his hatch all up so he stoped going there but idk i guess you could try it

chewiejdh

well, who or where does everybody go to when they want to run on a dyno? Other than P1 Auto? Who has dyno facilities in NC?

TomC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaracing1 &raquo;</TD></TR><TR><TD CLASS="quote">hp imports does alright work i guess from what ive heard, my friend craig said they messed his hatch all up so he stoped going there but idk i guess you could try it </TD></TR></TABLE>

Iv only seen good things come out of this shop, bought almost all of my Turbo setup and my motor/trans for great prices .. http://www.waynesdyno.net addy is below , They are having an Import Only Dyno Day this Sat ( March 20th )

Wayne's Dyno & Performance
3789 Richlands HWY
Jacksonville, NC 28540

tz-devil77

hte only dyno i plan on runnig is turbo tune

http://www.turbotuneusltd.com/

There is also eurospeed in cary. http://www.eurospeed.com I know they are schduling a dyno day coming up soon.

check http://www.carolinahondas.com