Gabrial struts with coilover sleeves binding
10-21-2014, 07:09 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Gabrial struts with coilover sleeves binding
So I'm new here but I have a 98 coupe with a d16y7 in it. I recently put gabrial struts with coilover sleeves. I believe I'm experiencing binding because I'm pretty low and my car vibrates violently under acceleration. What options do I have to solve this. Thanks ahead of time
10-21-2014, 07:11 PM
#2
Honda-Tech Member
Thread Starter
Join Date: Apr 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
re: Gabrial struts with coilover sleeves binding
Before anyone says search I did and almost everything was h22 related. I just want to know if I should replace the axle or can I keep the one I have and lift the car
10-22-2014, 11:52 AM
#4
re: Gabrial struts with coilover sleeves binding
I have a feeling there's a lot of stupid going on here.
"Pretty low" doesn't tell us anything. It also doesn't tell us alignment specs, which would affect binding. Give us complete information.
Car information
For all technical questions, the following information MUST be included in the first post: vehicle (year, make, model) and engine (if not stock, year, make, model, OBD type). Other pertinent information includes check engine light (CEL) codes as well as engine modifications, such as a turbo kit tuned at 18 psi or a specific throttle body, large injectors, big cams, etc. This information is absolutely essential because, in many instances, members wishing to help in a thread waste their time by posting detailed replies, only to find out the next day that the topic starter left out CRITICAL information. Please respect members wishing to help by taking the time to list or mention crucial information about your car.
For all technical questions, the following information MUST be included in the first post: vehicle (year, make, model) and engine (if not stock, year, make, model, OBD type). Other pertinent information includes check engine light (CEL) codes as well as engine modifications, such as a turbo kit tuned at 18 psi or a specific throttle body, large injectors, big cams, etc. This information is absolutely essential because, in many instances, members wishing to help in a thread waste their time by posting detailed replies, only to find out the next day that the topic starter left out CRITICAL information. Please respect members wishing to help by taking the time to list or mention crucial information about your car.
10-23-2014, 07:10 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Gabrial struts with coilover sleeves binding
Honestly I havnt done any measurements but I did not get an alignment and my oilpan is about an inch and a half to 2 inches off the ground. I understand there oem replacements and I obviously shouldn't be slammed on them but **** it if I have to raise the car then so be it. The vibration is unbareable at this point and doesnt seem safe. The odd part is the car only vibrates while accelerating. Not while rolling but my mounts are all pretty good
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
707Bay
Honda Civic / Del Sol (1992 - 2000)
31
05-31-2014 07:08 PM