Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda Civic/Del Sol (1992 - 2000)
Sign in using an external account
Register Forgot Password?
Search


Welcome to Honda-Tech!
Welcome to Honda-Tech.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!


Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
Old 01-13-2009, 02:24 PM   #26
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by RonJ@HT View Post
With the service connector jumped, the CEL should stay ON steady if there are no codes stored in the ECU. Your ECU might be bad or the service connector circuit has an open.
Wow, way to hit me with worst case scenario. un****ing believable, well what do i do now
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 02:29 PM   #27
Raising the bar
 
RonJ@HT's Avatar
 
Join Date: Feb 2008
Location: Houston, Texas
Posts: 34,715
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

I am sorry if my answers disappoint. Just trying to help you find a solution.

It could be a bad wire, but you'd need to be able to identify it. Circuit diagrams in the service manual would help with this effort.

Do you have a friend with the same ECU? If so, try ECU swapping to see whether it solves the problem.
RonJ@HT is offline   Reply With Quote
Old 01-13-2009, 02:36 PM   #28
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Yeah I understand, this is just unbelievable frustrating me to a goddamn boiling point.


**** this, ill let those messes rob me of $100 at the dealership and Ill let them deal with it. I need a beer
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 02:45 PM   #29
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

did u try startin the car up cold and letting it idle until the fan comes on b4 u started driving? for Evap and Cat monitors it requires u to do that otherwise they wont enable..i can usually get the Cat monitor to enable without letting the fan kick on once but the Evap monitor is more of a PITA to get to set
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 01-13-2009, 02:57 PM   #30
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by ekb16 View Post
did u try startin the car up cold and letting it idle until the fan comes on b4 u started driving? for Evap and Cat monitors it requires u to do that otherwise they wont enable..i can usually get the Cat monitor to enable without letting the fan kick on once but the Evap monitor is more of a PITA to get to set
Yeah, I did that, 3 times during the course of 4 seperate days. im so pissed off with this puzzle, I'm letting Honda fix it.
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 04:02 PM   #31
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

most likely there is something wrong wit ur car then...the dealership will prob tell u to replace ur Evap bypass sol/ valve and maybe a cat and o2 sensors
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 01-13-2009, 04:46 PM   #32
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

yeah, I'm pretty sure the cat is on it's way out, if it's not already... all i need is to pass an inspection, then I can take the shitty cat off and throw a test pipe on until I can get a new one. there has to be a logical explanation for why this is kicking my *** so badly these past weeks. ill grab a primary 02 sensor while I'm at it, it's probably better to replace both at the same time, rather than just changing one.

argh
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 05:19 PM   #33
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

i was having the same problem when i tried to ref. my jdm gsr in my ek..i failed cuzz 2 of my monitors(evap,cat) didnt set and high HCs...ive replaced half of my evap systm and still didnt fix the monitor..turns out i had a short in my evap bypass sol. and that fried the circuit in my ecu and the monitor wouldnt set, so i bought another ecu and it fixed that evap monitor issue...the cat monitor didnt set bcuzz i didnt drive it under the Enable conditions
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 01-13-2009, 05:31 PM   #34
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by ekb16 View Post
ive replaced half of my evap systm and still didnt fix the monitor..turns out i had a short in my evap bypass sol. and that fried the circuit in my ecu and the monitor wouldnt set, so i bought another ecu and it fixed that evap monitor issue...
What exactly does it mean when you 'fry a circuit in the ecu'. I would assume there would be many more problems is there was a major issue such as that.

Quote:
Originally Posted by ekb16 View Post
...the cat monitor didnt set bcuzz i didnt drive it under the Enable conditions
Yeah, doing it the right way is tough.
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 05:39 PM   #35
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by ^XpLiCiTxX^ View Post
What exactly does it mean when you 'fry a circuit in the ecu'. I would assume there would be many more problems is there was a major issue such as that.

i thought the same thing ur thinking about, but my car ran perfectly fine..the only thing wrong was that everytime i would reset the ecu and take the car for a drive i would get a Temporary DTC P1467..after diagnosing that stupid code for 2months it turned out that i wasnt getting a signal from the ecu at A15 pin, instead i would get a constant 12v when it should be duty cycling...i guess it just shorted out the evap circuit on the ecu and caused no other problems except for the evap stuff
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 01-13-2009, 05:48 PM   #36
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Well that most likely explains why I threw an Inc for the evap moniter, but what about the catalyst moniter and 02 sensor? I changed the damn thing already... I know it was a Denso sensor, i bought it when I needed other parts, so i got it with a bunch of things and I definitely don't have the box it came in anymore as I changed it a while ago.


What's the process in fixing the short then?


I had an alarm installed in the past 4 months, and there was a lot of wiring done, obviously, could that some how have messed something up?
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 05:52 PM   #37
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

ur evap bypass sol might be bad cuz it gets corroded so that might fix ur evap monitor problem..the cat and 02 im not sure about...there is usually 2 o2 monitors..1 is 02 sensor itself which should already be set when the car is first started and the other is the Heated 02 which should take some driving just like the cat to be able to get Enabled...if u Do have a short in ur ecu then u would need to replace it
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 01-13-2009, 06:35 PM   #38
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by ekb16 View Post
ur evap bypass sol might be bad cuz it gets corroded so that might fix ur evap monitor problem
this seems like a harmless fix, how wrong am I?

Quote:
Originally Posted by ekb16 View Post
there is usually 2 o2 monitors..1 is 02 sensor itself which should already be set when the car is first started
then could there be something wrong with my primary sensor, even though there's no code for it? Like I stated earlier, i haven't replaced the primary, ever. and i dont have a record of it being changed, so thats a red flag in my mind.

Quote:
Originally Posted by ekb16 View Post
and the other is the Heated 02 which should take some driving just like the cat to be able to get Enabled.
yea, that one is fine though. its one of the only ones that passed lol.


Quote:
Originally Posted by ekb16 View Post
if u Do have a short in ur ecu then u would need to replace it
holy ****, i sure hope not. if this is the case how much would another stock ecu be?
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 06:40 PM   #39
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

the evap bypass sol and valve is an easy fix..its located on top of ur fuel tank or to the side of it..i think its like 80-100 for both

since u never replace ur primary 02 i suggest u do since its not settings the 02 sensor monitor..could also be y ur cat monitor isnt setting also

IF it is ur ecu that is bad u could prob find a cheap ecu on ebay..if u get one from the dealership its usually 400+
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 01-13-2009, 06:45 PM   #40
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

damn ekb16, you're really helpful.

this makes me want to cancel my appt tomorrow morning and instead change the primary 02 sensor, reset everything again and try this process over again. I'll look into the evap bypass solenoid and valve as well. Good lookin man
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 06:50 PM   #41
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

ive had these same problems b4 so i know somewhat about ur issues..

good luck and solving ur probem, just pm me if u still have any questions and ill try my best and help u out if i can
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 01-13-2009, 07:20 PM   #42
Honda-Tech Member
 
v8 integra's Avatar
 
Join Date: Sep 2004
Posts: 519
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

if u need a evap canister to fix ur evap monitor..i got 1 for sale
__________________
96 civic ex JDM b16 swap.. RIP http://is.rely.net/1-92-65076-l-NREc...mLFY3DaZnA.gif n then brought back to life http://images.honda-tech.com/set1/smile/emsmile.gif
DC sport headers
N1 apexi cat back exhaust
v8 integra is offline   Reply With Quote
Old 01-13-2009, 07:51 PM   #43
Junior Member
 
jdmracer12's Avatar
 
Join Date: Mar 2007
Location: bumfunk athens, pa
Posts: 157
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

maybe you have a bad o2 sensor.
__________________
I have never seen a honda tbelt jump teeth with everything else set and working properly. Does the engine turn over like WAA WAA WAA WAA WAA or does it go WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE? Bent valves?

we all share 3 things in common: we all lie, we all cry, and we all take painful *****

jdmracer12 is offline   Reply With Quote
Old 01-13-2009, 08:17 PM   #44
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by v8 integra View Post
if u need a evap canister to fix ur evap monitor..i got 1 for sale
I'll def hit you up tomorrow if I need it. good lookin


yea im buyin another 02 sensor tomorrow
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 01-13-2009, 08:26 PM   #45
Honda-Tech Member
 
v8 integra's Avatar
 
Join Date: Sep 2004
Posts: 519
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by ^XpLiCiTxX^ View Post
I'll def hit you up tomorrow if I need it. good lookin


yea im buyin another 02 sensor tomorrow
aite np.. i bought it for no reason cuz im running obd1... lmk
__________________
96 civic ex JDM b16 swap.. RIP http://is.rely.net/1-92-65076-l-NREc...mLFY3DaZnA.gif n then brought back to life http://images.honda-tech.com/set1/smile/emsmile.gif
DC sport headers
N1 apexi cat back exhaust
v8 integra is offline   Reply With Quote
Old 02-12-2009, 02:41 PM   #46
Honda-Tech Member
 
eastbobdam's Avatar
 
Join Date: Feb 2007
Location: Boston, MA, US
Posts: 203
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Bro, how did you make out? I did a mini me and are currently dealing with the same ****. No CEL what so ever after doing the potentiometer trick for the FPS but now the EVAP monitoring **** is out of wack. Is there a way to loop back the system to trick it?

My rejection sticker expires this Tuesday (2/17/09).
eastbobdam is offline   Reply With Quote
Old 02-12-2009, 03:00 PM   #47
Honda-Tech Member
 
ekb16's Avatar
 
Join Date: Feb 2005
Location: ca
Posts: 2,688
iTrader Rating: (1)
Send a message via AIM to ekb16
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by eastbobdam View Post
Bro, how did you make out? I did a mini me and are currently dealing with the same ****. No CEL what so ever after doing the potentiometer trick for the FPS but now the EVAP monitoring **** is out of wack. Is there a way to loop back the system to trick it?

My rejection sticker expires this Tuesday (2/17/09).
no way to really trick the system...u just gotta drive it and if there is something wrong wit the system then the CEL will come on...the evap monitor is probably the harder one and longest one to get to set..best way is to start the car cold and let it idle until the fan comes on 1x..drive it on the freeway for at least 30-40miles around trip and check to see if the monitor is set..if it doesnt set then let the car cool down again and start over...keep doing it and eventually something will happen, either a CEL will pop up or the system will set to ready
__________________
B.A.R. member as of 3/18/09 JDM gsr in 98 hatch
Voches: chickwithastick,93allmotorcoupe,jomama,punoy69,Tom theman70
ekb16 is offline   Reply With Quote
Old 02-12-2009, 03:16 PM   #48
Honda-Tech Member
 
eastbobdam's Avatar
 
Join Date: Feb 2007
Location: Boston, MA, US
Posts: 203
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by ekb16 View Post
no way to really trick the system...u just gotta drive it and if there is something wrong wit the system then the CEL will come on...the evap monitor is probably the harder one and longest one to get to set..best way is to start the car cold and let it idle until the fan comes on 1x..drive it on the freeway for at least 30-40miles around trip and check to see if the monitor is set..if it doesnt set then let the car cool down again and start over...keep doing it and eventually something will happen, either a CEL will pop up or the system will set to ready
I have no CEL and have over 500 miles logged. Do you think this is from the mini me swap? I took it to the inspection station and had a bunch of readiness codes throw but the second time I went and got sent away, there were only three and they were the EVAP, and two others that I can't remember, I think the CAT somthing but I had a new Catalytic converter installed so I know it can't be that.

There is not way to like loop the hoses back into themselves? I need one to clear and I should be good.
eastbobdam is offline   Reply With Quote
Old 02-12-2009, 05:10 PM   #49
Honda-Tech Member
 
^XpLiCiTxX^'s Avatar
 
Join Date: Mar 2008
Location: Westchester, New York, United States
Posts: 1,325
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

I'll be doing a complete motor swap in the next couple of weeks, just a "more fresh" Y8 with a few goodies, but nothing serious just yet.

I'm hoping to pass inspection after the swap goes in, im just gonna wait till then, its just too fu((ing frustrating to keep failing at it.

I threw a test pipe on because my cat is just horrendous and its been running noticeably better.


Honda wanted [a minimum] $102 to diagnose the [potential] problem with the ECU, I laughed and deceided to wait it out and see what happens after the swap. its just a pain in the ***
__________________
-Vouches: Mr. EM1, Gregmatic, themouse, Mr. Marcin, b63phatch,
terqui, killerpenguin21, delsoldreams, mikeymcm!, b16racereg6
WTB: 94-97 integra front+rear bumper (silver pls)!
^XpLiCiTxX^ is offline   Reply With Quote
Old 02-13-2009, 03:06 AM   #50
Honda-Tech Member
 
eastbobdam's Avatar
 
Join Date: Feb 2007
Location: Boston, MA, US
Posts: 203
iTrader Rating: (0)
Default Re: FAILED inspection - twice for same thing [OBD not ready]

Quote:
Originally Posted by ^XpLiCiTxX^ View Post
I'll be doing a complete motor swap in the next couple of weeks, just a "more fresh" Y8 with a few goodies, but nothing serious just yet.

I'm hoping to pass inspection after the swap goes in, im just gonna wait till then, its just too fu((ing frustrating to keep failing at it.

I threw a test pipe on because my cat is just horrendous and its been running noticeably better.


Honda wanted [a minimum] $102 to diagnose the [potential] problem with the ECU, I laughed and deceided to wait it out and see what happens after the swap. its just a pain in the ***
I hear ya bro.....but be warned because I had an 97 Cx and did the mini me swap (Y8 head) and I don't know if this caused the EVap **** or not. I think my next step is to go back and get another rejection sticker to buy me two more months (I believe I can do this) and then swapping my Y7 TB (3 wire) back in and repinning the ECU back to the original configuration and then going to get a sticker. I think these issues are coming from the P2P ECU....... I was also wondering if I could trick the monitoring system somehow by looping the EVAP hoses back to itself or somehting. I did the pot trick to get rid of code 91 or P0453 and it worked. This is what sucks, I have no CEL's/Codes and I passed safety, it's just the stupid monitoring **** is not ready and killing/preventing me from passing!
eastbobdam is offline   Reply With Quote
 
 
 
submit to reddit
Reply

Tags
97, cat, civic, fail, im, inspection, ma, massachusetts, monitor, o2s, obd, ready, rules, sensors, twice

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2006 Civic EX COUPE, FAIL... otherink Honda Civic (2006 - Current) 11 01-19-2014 04:31 PM
2006 civic EX coupe, fail... otherink Tech/Misc 7 01-19-2014 11:20 AM
Re-learn? 1990 accord 89dxcivic Honda Accord (1990 - 2002) 5 01-03-2013 02:05 PM
2006 CRV SE showing ODB2 "Not Ready" Reapermen Ridgeline : MDX : Odyssey : Pilot : RDX 5 07-30-2009 02:10 AM
Failed Smog Check: Function Test error. Emissions were fine. Need some help here! undertheradar Honda Civic/Del Sol (1992 - 2000) 6 10-18-2004 02:45 PM



All times are GMT -8. The time now is 09:11 PM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details