did search: cel light hard start
#1
Thread Starter
Join Date: Dec 2007
Location: racine, wi, usa
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
did search: cel light hard start
Ok So I went to start my car today and it just cranked and cranked. When I did Fired I had to pedal it till it was warm to stay running, Once running it was fine But there was a cel light. Check code to get
cel 62
cel 21
Now I did look in the sticky but there is no 62 ans what the F is a vtec spool (cel21)
Any Help please...
I will double check the number in a min and re check the cel light
cel 62
cel 21
Now I did look in the sticky but there is no 62 ans what the F is a vtec spool (cel21)
Any Help please...
I will double check the number in a min and re check the cel light
#3
Honda-Tech Member
Re: did search: cel light hard start (wicked_b16eg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wicked_b16eg »</TD></TR><TR><TD CLASS="quote">oh and it was 6 fast flashes 2 long the 2 fast then one long</TD></TR></TABLE>
you have a code 6 and a code 22.
code 6 is ECT - water temperature sensor
code 22 is VTEC pressure valve
you have a code 6 and a code 22.
code 6 is ECT - water temperature sensor
code 22 is VTEC pressure valve
#4
Thread Starter
Join Date: Dec 2007
Location: racine, wi, usa
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Re: did search: cel light hard start (philosofy1)
Thanks!
Im sitting in the car right now and the heat isnt as hot as it should be but that not my concern right now.
My concern is that is it idling at 1160 and wont go down. Is this cause its stuck in cold start due to the ECT?
Im going to check the connector right now but other then that I dont know where to begin lol. Why does this have to happen on hung over day lol
Im sitting in the car right now and the heat isnt as hot as it should be but that not my concern right now.
My concern is that is it idling at 1160 and wont go down. Is this cause its stuck in cold start due to the ECT?
Im going to check the connector right now but other then that I dont know where to begin lol. Why does this have to happen on hung over day lol
#5
Honda-Tech Member
Re: did search: cel light hard start (wicked_b16eg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wicked_b16eg »</TD></TR><TR><TD CLASS="quote">Thanks!
Im sitting in the car right now and the heat isnt as hot as it should be but that not my concern right now.
My concern is that is it idling at 1160 and wont go down. Is this cause its stuck in cold start due to the ECT?
Im going to check the connector right now but other then that I dont know where to begin lol. Why does this have to happen on hung over day lol</TD></TR></TABLE>
it could be, never had one go out on me so i wouldn't know. the water temp sensors aren't expensive and are easy to change.
Im sitting in the car right now and the heat isnt as hot as it should be but that not my concern right now.
My concern is that is it idling at 1160 and wont go down. Is this cause its stuck in cold start due to the ECT?
Im going to check the connector right now but other then that I dont know where to begin lol. Why does this have to happen on hung over day lol</TD></TR></TABLE>
it could be, never had one go out on me so i wouldn't know. the water temp sensors aren't expensive and are easy to change.
#6
Thread Starter
Join Date: Dec 2007
Location: racine, wi, usa
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Re: did search: cel light hard start (philosofy1)
well my temp gauge has not moved a hair and im kinda worried that my car migth over heat on my way to get a new sensor. This is my only car lol g/f is leaving so I take her but im going to go get a new sensor right now and see what happenes
Thread
Thread Starter
Forum
Replies
Last Post
crazyguy
Honda Civic / Del Sol (1992 - 2000)
5
08-21-2007 10:01 AM