D15B block, D16z6 head, will the z6 tranny bolt up?
09-12-2010, 04:03 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: D15B block, D16z6 head, will the z6 tranny bolt up?
Lol cool thanx guys, i did run into 1 problem that i have a solution for on the way already but i just thought i'd post it to possibly help someone else! The flywheel that was on the d15b block doesn't fit with the clutch i took of the d16z6. My plan is to just use the z6 flywheel waitin on an impact wrench to get them off kuz i can't get them myself. Should work though i'll let you guys know!
09-12-2010, 04:57 PM
#7
Honda-Tech Member
Join Date: Apr 2009
Location: Newfoundland,Canada
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Re: D15B block, D16z6 head, will the z6 tranny bolt up?
b fits b
d fits d (unless 01++)
f fits f/h
Tighten in one of your "bell housing bolts" so to speak and jam a pry bar onto the tooth of your flywheel, or get a 17 or 19 mm soccet,and a power bar and put it on your crank pulley and jam it on the floor and loosen and tighten them from there.
d fits d (unless 01++)
f fits f/h
Tighten in one of your "bell housing bolts" so to speak and jam a pry bar onto the tooth of your flywheel, or get a 17 or 19 mm soccet,and a power bar and put it on your crank pulley and jam it on the floor and loosen and tighten them from there.
Thread
Thread Starter
Forum
Replies
Last Post
JDMCRX
Honda Civic / Del Sol (1992 - 2000)
3
10-14-2003 08:33 AM
KStuned
Honda Civic / Del Sol (1992 - 2000)
2
09-04-2003 02:10 PM
