Complete LS into a 94 DX swap guide
05-27-2003, 07:07 PM
#1
Thread Starter
Join Date: Oct 2002
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Complete LS into a 94 DX swap guide
hey guys i know i saw a complete guide that had all the wiring and that kind of stuff somewhere and im gonna be dropping in my engine in a little while, its a B18B1 and its going into a 94 DX so i need a little bit o help on this one, thanks a lot guys, and i tried searching but i was ultimately unsucessful
05-27-2003, 07:10 PM
#2
Honda-Tech Member
Join Date: Sep 2002
Location: Vila Velha, Brasil
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete LS into a 94 DX swap guide (madhatter07)
if the motor/tranny is from a 94-95 integra, it should be a direct swap. No extra wires will be need. You can your stock or b18b1 harness. it will be a plug and play
05-27-2003, 07:25 PM
#3
Thread Starter
Join Date: Oct 2002
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete LS into a 94 DX swap guide (brryder)
what if its a civic Si tranny? also im kind of embarrased to ask this but how the hell does the transmission hook up to the driveshaft and please do not make fun of me for that, i am trying to gain experience by doing the swap myself so give me a little credit
05-27-2003, 07:28 PM
#4
Join Date: Oct 2002
Location: va, USA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete LS into a 94 DX swap guide (madhatter07)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by madhatter07 »</TD></TR><TR><TD CLASS="quote">also im kind of embarrased to ask this but how the hell does the transmission hook up to the driveshaft</TD></TR></TABLE>
No driveshaft. Just axles, they go in the holes on the sides of the tranny. Pass side is the longer axle, shorter one is driver side.
No driveshaft. Just axles, they go in the holes on the sides of the tranny. Pass side is the longer axle, shorter one is driver side.
05-27-2003, 07:28 PM
#5
Honda-Tech Member
Join Date: Sep 2002
Location: Vila Velha, Brasil
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete LS into a 94 DX swap guide (madhatter07)
unless you have a custom RWD/AWD civic, you dont have to worry about the driveshaft. 
You will need 94-01 integra or 99-00 civic si axles and shift linkage. The b16-hydro tranny and b18b1 motor will bolt right in.
You will need 94-01 integra or 99-00 civic si axles and shift linkage. The b16-hydro tranny and b18b1 motor will bolt right in.
05-27-2003, 07:47 PM
#7
Honda-Tech Member
Join Date: Jun 2002
Location: Bossier Shitty, LA
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete LS into a 94 DX swap guide (madhatter07)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by madhatter07 »</TD></TR><TR><TD CLASS="quote">lol driveshaft, i told you i didnt know much about swapping
edit also:
how do the wires from the engine get down to the ECU?</TD></TR></TABLE>
The wires are already there....the engine wiring harness "plugs" into the chassis harness which then plugs into your ecu. There is a set of gray plugs on the left side of your engine bay which leads through the firewall to the ecu.....
edit also:
how do the wires from the engine get down to the ECU?</TD></TR></TABLE>
The wires are already there....the engine wiring harness "plugs" into the chassis harness which then plugs into your ecu. There is a set of gray plugs on the left side of your engine bay which leads through the firewall to the ecu.....
Trending Topics
05-28-2003, 10:38 AM
#9
Banned
Join Date: Jun 2001
Location: Youngstown, OH
Posts: 1,992
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete LS into a 94 DX swap guide (madhatter07)
what about the o2 sensor?? your dx is 2 wire and b18b is 4-wire?
i have the same question, which is why i am asking
thanks
i have the same question, which is why i am asking
thanks
05-28-2003, 10:59 AM
#10
Honda-Tech Member
Join Date: Jun 2002
Location: Bossier Shitty, LA
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Re: Complete LS into a 94 DX swap guide (Burke)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Burke »</TD></TR><TR><TD CLASS="quote">what about the o2 sensor?? your dx is 2 wire and b18b is 4-wire?
i have the same question, which is why i am asking
thanks</TD></TR></TABLE>
The O2 on my DX is a 4 wire. works fine.
i have the same question, which is why i am asking
thanks</TD></TR></TABLE>
The O2 on my DX is a 4 wire. works fine.
05-29-2003, 07:13 PM
#12
Thread Starter
Join Date: Oct 2002
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mrpeabody)
oh shat now im confused, do i need some different parts? also another newbie question, what the shift likage hook to? im assuming the shifter and the transmission right?
Thread
Thread Starter
Forum
Replies
Last Post
NA-Cutie
For Sale
24
01-11-2005 09:41 AM
