change brake pads in the back?
#1
Junior Member
Thread Starter
change brake pads in the back?
i know how to change brake pads in the front, and the back should be the same, but do u have to bleed the brakes for the back?
#3
Honda-Tech Member
Join Date: Sep 2002
Location: Bloomington, IN
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Op IVY Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Op IVY Si »</TD></TR><TR><TD CLASS="quote">You need a special tool to push the piston back in on the rear brakes. </TD></TR></TABLE>
Not really. On my del Sol rear disc brakes the piston was like a phillips screw. I just grabed a thick straightedge and turned it back in. You should lube the seals with some sort of oil, though.
Do you have rear disc brakes, though? Or drums? Discs are mostly the same as the front; not hard to figure out. Drums I have no idea.
Not really. On my del Sol rear disc brakes the piston was like a phillips screw. I just grabed a thick straightedge and turned it back in. You should lube the seals with some sort of oil, though.
Do you have rear disc brakes, though? Or drums? Discs are mostly the same as the front; not hard to figure out. Drums I have no idea.
#6
Join Date: Apr 2002
Location: You Dont Want nO Problem in New Hoeleans
Posts: 2,121
Likes: 0
Received 3 Likes
on
3 Posts
Re: (sting94112)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sting94112 »</TD></TR><TR><TD CLASS="quote">for the front i used a C clamp. can i use a C clamp in the back too ?</TD></TR></TABLE>
back no. all u need is a needle nose plier, open it up a bit and turn the piston with it going clockwise.
back no. all u need is a needle nose plier, open it up a bit and turn the piston with it going clockwise.
#7
Honda-Tech Member
Join Date: Jul 2003
Location: bowie, MD, usa
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Re: (O.G triple O.G)
or you can use a prybar too thats what i used but all methods work if u dont have the proper tool forgot what its called though its a cube though.
Thread
Thread Starter
Forum
Replies
Last Post