B18C EG2

ok i blew my headgasket today after only putting 200 miles on my build...
sucks ***....

anyways on with the question

i blew the headgasket and to state the obvious it was apparent that the water was mixing with the oil.....i pulled the head the night i noticed it was overheating...and drained all the oil....the cylinders looked fine wiht no scoring...i put oil in the cylinders and clean em up a lil....

how do i clean all that stuff outta the oil pan and the coolant chambers?

flush it once motor is put back together?
pull oil pan?
i dono..

i planned on replacing the gasket...coolant flushing...pulling the pan and cleaning that...and just running it


need suggestions....if i need more help?

honda_civic1

what I did and the easy way I think, is to get a vaccum. Then get some sort of little/skinny hose and just suck up all that cooletnt/oil/etc into the vaccum.

gl.

hitvtecgetloud09

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by honda_civic1 &raquo;</TD></TR><TR><TD CLASS="quote">what I did and the easy way I think, is to get a vaccum. Then get some sort of little/skinny hose and just suck up all that cooletnt/oil/etc into the vaccum.

gl.</TD></TR></TABLE>

never though of that just.

i would just drain watt evers in the pan and dry to suck out as much as i can and once u get the car running agian i would flush out both the rad. and the motor.

how'd u blow a headgasket btw after 200mile..

good luck.