Shonda

i'm finishing a b16 swap into my 97 EK but the intermediate shaft didnt match the holes in my tranny ( its a jdm engine sir II with b16 trans ) ...
Is the intermediate shaft for auto trans or maybe it is from 90-93 integra ...

im really confused !! What intermediate shaft can fit a hydro tranny with 90-93 interga axles or 94+ interga axles !! Because i dont know what axles do i have !!

Thanks for help guys ..

YZFR6

Find out what intermediate you have first. For your swap interms of OEM axles, just use the 99-00 Honda Civic Si axles. You shouldn't have a big problem with this one.

Sloshy

there's two type of intermidiate shafts hydro and cable, they both use different axles but if you use the same groupof axles and inter-shaft theyll work. basically if you have a cable-tran inter-shaft, if you get two cable-tran axle theyll work. same goes for hydro, but you can NOT mix them up

hydro axles + hydro inter-shft = GOOD
cable axles + cable inter-shft = GOOD
hydro axles + cable inter-shft= bad

you get the point hopefully it helps you

fmrprojects

the 90-93 half shaft is female and the axle is male
the 94-up half shat is male and the axle is female

this is the driver side. if you gonna use a hydro tranny, i would just use 94-up axles and half shaft