Axle problems
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: Port Richey, FL, USA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Axle problems
I just got a new driver side axle with no ABS, I cant get the tranny part into the tranny...its going in, but an inch out still....any suggestions?
#7
Junior Member
Join Date: Mar 2007
Location: Kansas City, going back to Cali
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Eran)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">Maybe I'm confused, but I didn't think axles had ABS ...</TD></TR></TABLE>
Are you serious? (That ring around the outside of the hub... Looks kind of like a big synchro. If it does have ABS)
Kaspk, try harder you have to force the axel in. Some C clips are stronger than others, making it harder for the axel to go in.
Are you serious? (That ring around the outside of the hub... Looks kind of like a big synchro. If it does have ABS)
Kaspk, try harder you have to force the axel in. Some C clips are stronger than others, making it harder for the axel to go in.
Trending Topics
#8
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
Re: (smiff95)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smiff95 »</TD></TR><TR><TD CLASS="quote">
Are you serious? (That ring around the outside of the hub... Looks kind of like a big synchro. If it does have ABS)
Kaspk, try harder you have to force the axel in. Some C clips are stronger than others, making it harder for the axel to go in.
</TD></TR></TABLE>
I'm aware there are different axles ... I was just not aware your axles were what gave you ABS
( .... I was being sarcastic .... )
Are you serious? (That ring around the outside of the hub... Looks kind of like a big synchro. If it does have ABS)
Kaspk, try harder you have to force the axel in. Some C clips are stronger than others, making it harder for the axel to go in.
</TD></TR></TABLE>
I'm aware there are different axles ... I was just not aware your axles were what gave you ABS
( .... I was being sarcastic .... )
#10
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
Re: (Kaspk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kaspk »</TD></TR><TR><TD CLASS="quote">Should I use a 2x4 and mallet?</TD></TR></TABLE>
I usually use a deadblow and just smack it in.
I usually use a deadblow and just smack it in.
#11
Junior Member
Join Date: Mar 2007
Location: Kansas City, going back to Cali
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Eran)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">
I usually use a deadblow and just smack it in.</TD></TR></TABLE>
Get mad!
I usually use a deadblow and just smack it in.</TD></TR></TABLE>
Get mad!
Thread
Thread Starter
Forum
Replies
Last Post
xrtdac
Tech / Misc
9
11-07-2003 10:27 AM