JCracer723

anyone had any issues with aftermarket radiators? im having trouble connecting the hoses.. the outlet and inlet nipples are a tad bigger...

1995 delsol.. single cam engine

running mishimoto...

vtec4lyfe

soak the hoses in VERY hot but not boiling water, this will provide a small amount of stretch when installing the hoses. I hope this helps

JCracer723

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtec4lyfe &raquo;</TD></TR><TR><TD CLASS="quote">soak the hoses in VERY hot but not boiling water, this will provide a small amount of stretch when installing the hoses. I hope this helps</TD></TR></TABLE>

ill give that a try... but size of stock rad outlet = 1 1/8s size of the mishimoto = 1 1/4 .. not sure if the hose would strech that much


Modified by JCracer723 at 4:37 AM 1/6/2007

JDM-Punk

bump cuz i idk

sasser43

1 1/4 is smaller than 1 7/8. Did you get those backwards?

JCracer723

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sasser43 &raquo;</TD></TR><TR><TD CLASS="quote">1 1/4 is smaller than 1 7/8. Did you get those backwards?</TD></TR></TABLE>

yeah sorry.... 1 1/8 sorry..

CerealWars

I went and purchased the hoses for a 99-00 Civic Si and just clamped down on the motor side. The only thing im not happy with is the upper hose and how its bent after I cut it. I might need to give it another try with a new hose.

turbovybez

I had to do the same thing. Only instead I bought the flexible radiator hose for the top. It still had a funny kink in it but a couple of zip ties and it was straight. I am in the middle of a swap now but as soon as I am done I will post up pics of my ghetto fab radiator hoses.