99/00 Civic Si Power Steering Pulley Size Diameter?
05-06-2008, 09:19 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA, USA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
99/00 Civic Si Power Steering Pulley Size Diameter?
Does anyone know what the diameter of the PS pump pulley for the 99/00 Si is?
I have what I *think* is a JDM ITR PS pump on my B16A2. While it's functional, I feel like the pump is way too strong, and as a result my steering is a bit twitchy.
I'd like to underdrive the pulley, if possible, and I'd prefer to do it OEM (plus I don't want to spend $300 for some crap bling parts). I suspect the OEM pulley is a smaller diameter than what I have since I had to buy quite a larger belt to fit over it (+50mm from stock).
In case it matters part number I'm curious about is 56483-P2A-003
I've guestimated with my tape measure that my pulley is ~4.75" in diameter (outer).
-a
I have what I *think* is a JDM ITR PS pump on my B16A2. While it's functional, I feel like the pump is way too strong, and as a result my steering is a bit twitchy.
I'd like to underdrive the pulley, if possible, and I'd prefer to do it OEM (plus I don't want to spend $300 for some crap bling parts). I suspect the OEM pulley is a smaller diameter than what I have since I had to buy quite a larger belt to fit over it (+50mm from stock).
In case it matters part number I'm curious about is 56483-P2A-003
I've guestimated with my tape measure that my pulley is ~4.75" in diameter (outer).
-a
Thread
Thread Starter
Forum
Replies
Last Post
civicdelsol33
Honda Civic / Del Sol (1992 - 2000)
3
08-23-2007 06:42 PM
