96 cx hatch with y8 swap very loud rumble
#1
Honda-Tech Member
Thread Starter
96 cx hatch with y8 swap very loud rumble
As title says very loud rumble and vibration upon start up and continues to 3500rpm through all gears. Car does need o2 sensor after cat. Exhaust doesn't look like it's vibrating at least not bad enough to create the sound. Also the sound and vibration is heard inside cabin not out of car
#4
Honda-Tech Member
Thread Starter
I just picked the car up the swap was done already I'll post a vid and some pics after work. In pretty sure the mounts are not stock though
#5
B*a*n*n*e*d
Join Date: Dec 2011
Location: Off da Golden Coast!! YAAARGH!!
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Re: 96 cx hatch with y8 swap very loud rumble
Sounds like you may have bought a car with solid mounts. You will get a lot of vibrations and noise in the cabin with solid mounts.
IMO, get used to it and welcome to Hondas.
IMO, get used to it and welcome to Hondas.
#6
Re: 96 cx hatch with y8 swap very loud rumble
OP could also re-install the stock mounts to eliminate the rumbling, assuming that the mounts are the problem as seems likely.
#7
B*a*n*n*e*d
Join Date: Dec 2011
Location: Off da Golden Coast!! YAAARGH!!
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Re: 96 cx hatch with y8 swap very loud rumble
More likely the OP will have someone showing him how to change them, but yes that is the best solution for him. Unless he likes the solid mounts. I hate mine, but I like how the car drives with them.
Trending Topics
#8
Honda-Tech Member
Thread Starter
I can change my own mounts. I just wanted an idea of some places to look as I haven't had anytime to thoroughly go over the car. I will still post pics
Thread
Thread Starter
Forum
Replies
Last Post
Sleepy_Red_hatch
Honda CRX / EF Civic (1988 - 1991)
25
12-20-2005 05:17 PM