93 hatch Zc Sohc Third gen trying to run obd1
#1
93 hatch Zc Sohc Third gen trying to run obd1
Check it new to this, done research and what I've got is a d16 zc sohc from an integra on my eg. Now it is obd 1 i got the p76 ecu everything to complete the swap, the problem is it has a and d and no b. was thinking about rewiring myself, but what can I do. Need help ASAP. Can I get a special harness? What about obd 0 to obd 1 harness?
Okay, so I was looking around and looked up the zc it came from a 94-95 integra and it's non vtec, the p76 came from this car, and came across a link saying that it could've been auto which explain why it has only a and d plug ins. But my question is what can I go about this?
Am I looking wrong info? If so help me and correct me.
Okay, so I was looking around and looked up the zc it came from a 94-95 integra and it's non vtec, the p76 came from this car, and came across a link saying that it could've been auto which explain why it has only a and d plug ins. But my question is what can I go about this?
Am I looking wrong info? If so help me and correct me.
#3
Honda-Tech Member
iTrader: (5)
Re: 93 hatch Zc Sohc Third gen trying to run obd1
The sohc zc is so similar to the si/ex(except it has more ***** at least mine seemed like it--had one in my hatch si (90) used the stock pm-6 on the si and ran great no issues.
I would just use a p28 for it. Of course if it were dohc then p-29
I would just use a p28 for it. Of course if it were dohc then p-29
Thread
Thread Starter
Forum
Replies
Last Post
SIred91
Honda CRX / EF Civic (1988 - 1991)
30
08-17-2006 07:35 PM
feelsfast
Honda CRX / EF Civic (1988 - 1991)
11
11-12-2003 05:53 PM