tlarimer

iTrader: (3)

Dang E., you beat me to it...LOL

93coupe585

are the manual doors and power doors the same skeleton except the internals? i found a manual door and i want to put my power internals in it. will it work?

tlarimer

iTrader: (3)

Yes they are the same.

deschlong

iTrader: (8)

^ Logic dictates: Yes. This write-up is about installing power options in all-manual doors. Surely this means that in your case you can install your power options in an all-manual door? I mean - come on, read the DIY and infer! Then journey to a higher mental plane.

ryrex02

thanks for the reply. p/s meaning power switch? i got the harness from a junk yard and had to get rid of some wires that i didnt have in my harness (figured it would compensate lol) i cant remember if it was a 4 door or a 2 door but it was not a hatch. Im siding with it may have been a 4 door. ill check out your sig thanks for ur help

ryrex02

the fuse pops and disables my passanger window, but both switches will pop the fuse. so im not sure what to do besides maybe get a different harness and deal with rewiring this sucker again lol. i checked my wires and there are no wires cut. thanks for your help guys

oses21

nice my dx could use this great diy btw!!

Kidnkorner

I have the subharness deloomed, cleaned up and ready to go if you are ready.

http://hondamarketplace.com/showthread.php?t=2915932

Touek

Will this work on an 97 ek hatch?

kyosoeg6

iTrader: (7)

no

bob708

Do you Know if the under dash harness of an integra 94-01 or 90-93 Will fit on my eg or if an ek harness will fit.
Thx

rolow

Glade the pics haven't disappeared from this d.i.y.

This was a great help thanks.

Kidnkorner

While many of the plugs may be the same or similar I can tell you that you would have to re pin some wires.

dgeghatch

i was thinkin about doing this idk tho xD
great write up tho i may use this

deschlong

iTrader: (8)

Integra 94-97 will work, not sure about 98-01. The others you mentioned will not work properly.

Actually, the Integras have the mirror switch on the door so it won't quite be perfect; you'll have to do some modification. However, the mirror switch plug is identical to the Civics so that is at least convenient.

cieloaristy

I have a problem with this on my eg hatch si. Recent i just put the power conversion on the driver side ( just to get everything started). Each time I used the power window switch my radio turns off and when i turn on my head light my radio turns off again. i check the ground and the fuse, and the wire everything seem fine. What else can be the problem? please sent me a message. THank you

B.B.

Just used this write up to convert my Eg hatch to power. Very easy to follow. Thanks man!!!

ciberclown

iTrader: (1)

I follow every step the exact way you show us!
but now when i try to start the car it doesn't, i don't even have dash lights, the main relay is Ok i just replace it but doesn't even click, the sunroof isn''t working either, !!!
i have lights in headlights, fog lights, tail lights, interior light, radio.

I have a 92 civic SI.

i check fuses, ground, the battery is almost brand new.

i unplugged everything and double check all the plugs and they are
properly connected!

PLEASE help me this is my DAILY DRIVE car

moebiius

You sir, messed up ^^^^^^ somewhere, learn how to back track before you blame Deschlong. He's been a pillar in this community for long enough that he doesn't need you to validate his work. As for helping you, we're more than willing provided you give us some information. Firstly, where are you located? What is the continent that your car was manufactured? What donor harnesses did you use to do the swap? Did you check all the wires to make sure there are no cuts, abrasions of of the sort? These are small factors, however make a bit difference when you're working with parts and wire harnesses

ExplicitJDM

OMG THANK YOU SO MUCH!!

twistedimage

Crazy u guys still using my write up right on glad I could help u guys

Touek

Dude you are awesome! Thanks for the hard work to creating this DIY!

kwijibodavid

ok now heres my question based on the same question i have a 96 integra rs that my bro is using for parts i want to take the door harnesses(the ones that are pluged in to the doors and fuse box) and install them in my 94 cx hb. my question is will it still be basically the same plugs or will i have to do a lot of depinning and repinning. the main reason im unsure is because when i looked at the ecu i realised it was obd2a thinking that it was a 94 and assuming it was obd1. if it matters i have full power doors of a 95 ex

cieloaristy

Check ur ground, recharge ur battery, check ur fuses. Only 3 plugs should of been change

kwijibodavid

ok so i just finished taking apart a 96 integra 2dr harness and there was 4 extra wires leaving the passanger side harness i beleve that they were prewired for a 4 door. so that the passenger lock switch could lock the rear doors can anyone confirm that these are what there for .
the colors are blk/red, light blue, blk/wht, and light green