Running on 1 cylinder
#1
Running on 1 cylinder
Hey everyone, long time, how's everyone?
Just seeking some advice/suggestions.
My car for the past 3-4 mths has been running good, once a mth it would bog when hitting the gas but still run (20-30 mins for that one day). Yesterday it was doing the same thing for 1/2 hr but this time it was giving me an engine light, I drove for a few mins, it went away and the car ran OK for the next 20 mins.
This morning, the car is doing the same thing and was running like total **** (a lot worse than yesterday), this time the engine light remained on while I was near my house this time so I pulled over and ran some codes and parked it. Basically it's running on 1 cylinder due to the codes I have received.
I received 5 codes:
P0300 Random/Multiple Cylinder Misfire Detected
P0302 Cylinder 2 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0304 Cylinder 4 Misfire Detected
P1399 Wait To Start Lamp Circuit
What are your suggestions on troubleshooting this? The motor is up for a tune up right now and I was getting around to doing it in the next couple of weeks but i'm unsure if it will resolve the current issue.
The car is driven like a granny so the motor is not taking a beating..oil level is good.
Any suggestions would be appreciated, thanks
Just seeking some advice/suggestions.
My car for the past 3-4 mths has been running good, once a mth it would bog when hitting the gas but still run (20-30 mins for that one day). Yesterday it was doing the same thing for 1/2 hr but this time it was giving me an engine light, I drove for a few mins, it went away and the car ran OK for the next 20 mins.
This morning, the car is doing the same thing and was running like total **** (a lot worse than yesterday), this time the engine light remained on while I was near my house this time so I pulled over and ran some codes and parked it. Basically it's running on 1 cylinder due to the codes I have received.
I received 5 codes:
P0300 Random/Multiple Cylinder Misfire Detected
P0302 Cylinder 2 Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0304 Cylinder 4 Misfire Detected
P1399 Wait To Start Lamp Circuit
What are your suggestions on troubleshooting this? The motor is up for a tune up right now and I was getting around to doing it in the next couple of weeks but i'm unsure if it will resolve the current issue.
The car is driven like a granny so the motor is not taking a beating..oil level is good.
Any suggestions would be appreciated, thanks
#5
MiG-21 superfan
Join Date: Mar 2001
Location: near the ocean, Moderator City, NJ
Posts: 8,628
Likes: 0
Received 3 Likes
on
3 Posts
Re: Running on 1 cylinder (mbsi)
i'd be curious about, at the most basic level, the condition of the plugs when it does this. see what they look like.
the intermittent problem is odd.
the intermittent problem is odd.
#6
Junior Member
Join Date: Jul 2007
Location: cathedral city, ca, us
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Re: Running on 1 cylinder (builthatch)
He posted in the wrong form at first https://honda-tech.com/zerothread?id=2291403
Thread
Thread Starter
Forum
Replies
Last Post