2003 Civic EX front brakes HELP QUICK!
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: BRICKTOWN, NEW JERSEY, USA
Posts: 1,393
Likes: 0
Received 2 Likes
on
2 Posts
2003 Civic EX front brakes HELP QUICK!
Ok i just put the new pads on, and i go to tighten up the 2 caliper bolts, but they just keep turning, it looks like the sliders keep on turning as i turn the bolt.
i held the flat part of the slider with a wrench and tightend it, and the bolts are tight now but the caliper still moves fairly easy
i held the flat part of the slider with a wrench and tightend it, and the bolts are tight now but the caliper still moves fairly easy
#2
Honda-Tech Member
Join Date: Dec 2000
Location: Cinnaminson, NJ, USA
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic EX front brakes HELP QUICK! (standbackimapro)
Once you apply the brakes a few times it will push the piston out of it's bore and the caliper will press the pads tight on the rotor.
#3
Honda-Tech Member
Join Date: Dec 2000
Location: Cinnaminson, NJ, USA
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2003 Civic EX front brakes HELP QUICK! (briq4)
And P.S. if for some reason you did one brake and then were going to the other, and didn't put the other back together yet, before you pump the brakes be sure that the other caliper has the pads installed and are on the rotor otherwise you might pop the piston out of it's bore.
Thread
Thread Starter
Forum
Replies
Last Post
JDM TypeR 307
Acura Integra Type-R
5
02-27-2004 06:07 PM