How to DISENGAGE VSA-traction control - Honda-Tech
Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda Accord & Crosstour (2003 - Current)
Log In 

How to DISENGAGE VSA-traction control

LinkBack Thread Tools Search this Thread
Old 03-18-2011, 09:50 AM   #1
Honda-Tech Member
SmogKing's Avatar
Join Date: Aug 2006
Location: Cal
Posts: 154
iTrader Rating: (0)
Default How to DISENGAGE VSA-traction control??

I had a 2010 Accord sedan that came in for inspection today, In order to run the vehicle on the Dyno we must disengage the VSA. I tried pressing the VSA OFF button but that did not help. I also tried holding it down for 10-15 sec, no success. Tried Cycling the key, turned car OFF then started it back up, still the VSA doesnt disengage.

I called my nephew which is a Honda Technician, he says that there wasnt any special procedure, all I needed to do was press the button and it would disengage. I had other Hondas(2005+) that would come in and I would have the same problem.

I know that there has to be a way to disengage the traction control, Any help would be appriciated.

Last edited by SmogKing; 03-18-2011 at 11:51 AM.
SmogKing is offline   Reply With Quote
Old 03-18-2011, 01:19 PM   #2
Honda-Tech Member
90sedan's Avatar
Join Date: Jun 2005
Location: WA
Posts: 2,327
iTrader Rating: (0)
Send a message via AIM to 90sedan
Default Re: How to DISENGAGE VSA-traction control

It should turn off by holding the switch down for a few seconds till you hear a beep.

If the low tire pressure light is on, or a tpms code is stored, VSA cannot be turned off.
SpeedFactory Tuning and Race Fabrication
90 Ef Sedan
vitara d16
90sedan is offline   Reply With Quote
Old 03-19-2011, 07:28 PM   #3
Honda-Tech Member
Kev2010's Avatar
Join Date: Sep 2010
Location: Boston, MA
Posts: 224
iTrader Rating: (0)
Default Re: How to DISENGAGE VSA-traction control

Disconnect the battery cable. Make sure you have the radio code.

This should "reset" the computer.
Kev2010 is offline   Reply With Quote
Old 03-20-2011, 08:03 AM   #4
Honda-Tech Member
Havasu_Junkie's Avatar
Join Date: Mar 2011
Location: Detroit, MI
Posts: 31
iTrader Rating: (0)
Default Re: How to DISENGAGE VSA-traction control

as to add to what 90sedan said. You need to get a scanner on there and see if there is any history or any other faults that may not trigger a dummy light.

Anything in the PGM-FI menu, or Engine menu, history or current, light on or off will cause VSA problems.

As already stated, check the TPMS menu, even if there is no TPMS or low tire light on, and there is a code stored, this overrides the VSA manual control.
Havasu_Junkie is offline   Reply With Quote

Similar Threads
Thread Thread Starter Forum Replies Last Post
2006 ap2. Traction stuck on? mish__ Honda S2000 3 10-24-2015 06:03 PM
VSA help needed BoostedEgHatchFl Odyssey | Ridgeline | MDX | Pilot | RDX | HR-V 5 09-02-2014 02:29 AM
TPMS and VSA 09+ Fit Todd00 Honda Fit 5 02-25-2012 07:29 PM
VSA switch? Red-Line Honda Accord (1990 - 2002) 4 12-13-2010 12:29 PM
VSA button question Mr_Si-R Honda Civic (2006 - 2015) 10 08-26-2010 04:42 PM

2003, 2006, 2008, 2011, accord, button, control, controller, disconnecting, honda, light, pilots, switch, traction, turn, vsa

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -8. The time now is 01:39 PM.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for content, comments, or advertising. is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse in any way. Copyright/trademark/sales mark infringements are not intended or implied.