F22 and H22 Compatibility
#1
Thread Starter
Join Date: Jul 2006
Location: Timmins, On, Canada
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
F22 and H22 Compatibility
Hey, i'm new to Honda-Tech. I was wondering if anyone knows if the header from a 4th gen Accord F22A1 would mount to an H22 engine? Because i will be doing a swap to a JDM H22. I would also like any tips possible to help during the swap!
Thanks
Thanks
#3
Honda-Tech Member
Join Date: Jul 2005
Location: Springfield, mo, usa
Posts: 1,556
Likes: 0
Received 3 Likes
on
3 Posts
Re: (ftspyder)
no it will not
Tips:
1. make sure to get the prelude high pressure side of the powersteering pump. you will be using the prelude pump
2. your f22 mounts will work just fine. you will only need to trim a little bit off of the driverside mount to make it fit
3. be sure and get the correct ecu. (p13)
4. go ahead and convert the dist to an internal coil. it will make things easier. It will work external coil, but it also makes the engine bay cleaner.
5. have fun
Tips:
1. make sure to get the prelude high pressure side of the powersteering pump. you will be using the prelude pump
2. your f22 mounts will work just fine. you will only need to trim a little bit off of the driverside mount to make it fit
3. be sure and get the correct ecu. (p13)
4. go ahead and convert the dist to an internal coil. it will make things easier. It will work external coil, but it also makes the engine bay cleaner.
5. have fun
#4
In a Junkyard near you.
Welcome to H-T. This topic has been covered many times before. For the future just use the search feature. you can get your information a lot faster
#5
H-T Order of Merit
Re: (ilikehonda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ilikehonda »</TD></TR><TR><TD CLASS="quote">no it will not
Tips:
1. make sure to get the prelude high pressure side of the powersteering pump. you will be using the prelude pump
2. your f22 mounts will work just fine. you will only need to trim a little bit off of the driverside mount to make it fit
3. be sure and get the correct ecu. (p13)
4. go ahead and convert the dist to an internal coil. it will make things easier. It will work external coil, but it also makes the engine bay cleaner.
5. have fun</TD></TR></TABLE>
Tips:
1. make sure to get the prelude high pressure side of the powersteering pump. you will be using the prelude pump
2. your f22 mounts will work just fine. you will only need to trim a little bit off of the driverside mount to make it fit
3. be sure and get the correct ecu. (p13)
4. go ahead and convert the dist to an internal coil. it will make things easier. It will work external coil, but it also makes the engine bay cleaner.
5. have fun</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
o2 jockey
Honda Accord (1990 - 2002)
9
10-30-2007 02:40 AM
WARCOVENANT
Hybrid / Engine Swaps
5
12-24-2005 06:48 PM