Need to know bout Throttle Cable Tighting?
#1
Honda-Tech Member
Thread Starter
Need to know bout Throttle Cable Tighting?
my cable is loose and i can tell cause my throttle doesnt come back all tthe way and i have a cruise control like sympton. it wont stop reving. it maintains where ever i have it.. i know its cause the cable is to loose. i alreay figured that out.. how do i tighten it?
#2
Junior Member
Join Date: Apr 2001
Location: SouthWest,, Florida, USA
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need to know bout Throttle Cable Tighting? (KTeller8)
you mean once you press on the gas pedal and let go it won't return to normal position ?? Um... that would not indicate the cable being loose.
if it WAS loose, you wouldn't be hitting WOT.
if it WAS loose, you wouldn't be hitting WOT.
#3
Honda-Tech Member
Join Date: May 2000
Location: Lawrenceville, GA, USA
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need to know bout Throttle Cable Tighting? (Escobar)
Sounds either overtightened or the spring that tensions the throttle cable on the throttle body came loose.
#4
Honda-Tech Member
Thread Starter
Re: Need to know bout Throttle Cable Tighting? (martaigne)
well there is a lot of slack in it.. my friend tighten it one time for me and it was ok.. but it was raining and i was moving through traffic so i pressed the gas and it did the whole .. drop shift crap.. were it feels like it is winding up.. and i had to hit the brakes hard.. cause the fool in front of me switched like four lanes... anyways.. the next time i hit the gas it wouldnt slow down it was frozen so to say. i pulled over and looked and there was slack.. i figured when i hit the brakes and revved at the same time.. it got caught and pulled to much or didnt let it go back.. anyways there is slack out the butt.. you can almost tie a knot
#5
Honda-Tech Member
Join Date: Feb 2002
Location: Peoria, IL, USA
Posts: 1,835
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need to know bout Throttle Cable Tighting? (KTeller8)
There are two nuts tightened together near the bracket on the intake manifold. Break those loose and back the one farthest from the bracket out of the way.
Tighten/loosen the other nut until you get the desired play in the pedal. Lock the other nut against it to keep it from moving.
I loosend both nuts all the way out and moved the inner nut in until the throttle body showed it was opening and then back off a hair.
Tighten/loosen the other nut until you get the desired play in the pedal. Lock the other nut against it to keep it from moving.
I loosend both nuts all the way out and moved the inner nut in until the throttle body showed it was opening and then back off a hair.
Thread
Thread Starter
Forum
Replies
Last Post
bayoufrogg
Honda Prelude
3
06-05-2007 06:25 PM
19992civichatch
Honda Civic / Del Sol (1992 - 2000)
6
01-10-2007 06:27 AM