GhostAccord

The water pump mounts to the block on both the F & H series engines, not the oil pump housing....

The silver stuff his is talking about is probably just never seize. You can clean it off with some throttle body cleaner or use simple green and warm water.

Honestly, for someone who has done a few hybrid builds. It seems more like you paid someone to build them for you. A lot of your information is confusing or wrong all together.

BIENDIESEL

lol mistaken the rear balance shaft gear as the water pump, yes i last built a turbo h22a in 1999, lasted me 10 years and yes i built it n put it together myself, just got back into honda in april after 7 years

bzmotoninja1983

OK, so I counted the can and crank gears, they are h22 gears. Now just need to ddouble check the belt i have. It might be right, I just think my friend is tired of looking @ it.

I was going to trade him for the 97 rodeo but, I just gotta cash offer on it and offered him b/t $1500-$1800..... he said yeah!!!!!


Thanks,

Bz

EDIT: I think the reason the belt shredded the way it did is it may not have been tensioned correct. Also, if you look at the pic with the timing gears, I didn't realize till today while I was at the car, the front heat has a small lip/sharp edge. Is it supposed to be smooth?

GhostAccord

Not sure what you mean when you are referring to "the front heat".

bzmotoninja1983

the front GEAR....... oops..... arent both gears supposed to be smooth and not have a raised edge? looking at it, its not raised like a idler bulley but like something wore it down or rubbed it. i just noticed it. you can kinda see it in the pics of the gears.....


thanks,
Bz

p.s. i hate auto text on my phone!

GhostAccord

Need a better picture. The flash glare and it being out of focus really makes it hard to confirm or deny anything. I can't tell if that is a lip or highlights & shadows. I do see what you are talking about though.

bzmotoninja1983

brb. gotta drive across town to get better pics. need to find some gears or, i might be able to sand them down a bit?......


thanks,

Bz

nevermind. its raining... :-(........ anyways, the edge that you can kinda see on the front gear, is actually sharpish..... i am looking for new gears, or sanding. tired....bed

bzmotoninja1983

Ok so, to dredge up some old ish that i started in the first place.........
I finally am getting to working on this nasty ****. I ordered a set of h22 cam gears(stockers) and, much to my dismay they are severely different. The (new) gears are about 1/4-3/8 inch smaller. They also dont seem to fit together the same.( think gears touching and turning).
I dont have pics because the camera app on my phone is on the fritz. ...... Eff-me!.
Anyone have a set if h23 gears to send me measurements like diameter?

bzmotoninja1983

bump. where are you GhostAccord?