B18ceed

i have a 95 accord ex sohc vtech and it has 170k on the motor and needs a valve adjust.thanks

TypRice

check under the hood...there should be a sticker from honda with the valve lash...
if the hood is oem!

P_Adams

Here you go. This should get you started.

intake: Low Limit = .009" High Limit = 0.011"
exhaust: Low Limit = 0.011" High Limit = 0.013"

Chiltons' and Hanes both report the same values for the F22a1, F22b1, F22b2 thru '97 and C27a4 for the '96 and '97 model years

P



Modified by P_Adams at 1:34 PM 2/22/2006

hondadude

.006-.007 Intake///.007-.008 Exhaust From Alldata tables

B18ceed

you must set tdc on every cylinder for each valve adjustment?

P_Adams

Yes. To do it properly each cylinder must be positioned at TDC (Top Dead Center) on the Compression Cycle. It's the only position where both the intake and exhaust valve followers are resting on the cam base circle; where they can be adjusted.

P

Honda-Master

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondadude &raquo;</TD></TR><TR><TD CLASS="quote">.006-.007 Intake///.007-.008 Exhaust From Alldata tables</TD></TR></TABLE>

we must be looking at different All-data tables.... the one i look at .. says

intake 0.26 mm .. 0.010 in

exhauast 0.30 mm.... 0.012 inc.............

...And i know mine is correct because it says the same thing on the helm book..