97 accord valve clearance specs?
#2
Join Date: Mar 2004
Location: Great White North, canada
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 accord valve clearance specs? (roydogg)
For 98 and 99 Accords;
Intake
Four cylinder engine----- 0.009-0.011"
Six cylinder engine-------0.008-0.009"
Exhaust----------------------0.011-0.013"
Sorry I don't the specs on a 97. Probably didn't help much huh?
Intake
Four cylinder engine----- 0.009-0.011"
Six cylinder engine-------0.008-0.009"
Exhaust----------------------0.011-0.013"
Sorry I don't the specs on a 97. Probably didn't help much huh?
#3
Honda-Tech Member
Join Date: Jun 2002
Location: San Jose, CA, USA
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 accord valve clearance specs? (roydogg)
For 1997 Accord(doesn't say for F22b2 or F22b1, but they probably the same...):
Valve Clearance:
Intake: 0.24 - 0.28 in (0.009 - 0.011 mm)
Exhaust: 0.28 - 0.32 in (0.011 - 0.013 mm)
Valve Stem Outside Diameter:
Intake: 5.485 - 5.495 in (0.2159 - 0.2163 mm)
Exhaust: 5.450 - 5.460 in (0.2164 - 0.2150 mm)
Valve Stem-to-guide Clearance:
Intake: 0.020 - 0.045 in (0.0008 - 0.0018 mm)
Exhaust: 0.055 - 0.080 in (0.0022 - 0.0031 mm)
I know u only need the clearence part, but the rest is semi useful as well......
Valve Clearance:
Intake: 0.24 - 0.28 in (0.009 - 0.011 mm)
Exhaust: 0.28 - 0.32 in (0.011 - 0.013 mm)
Valve Stem Outside Diameter:
Intake: 5.485 - 5.495 in (0.2159 - 0.2163 mm)
Exhaust: 5.450 - 5.460 in (0.2164 - 0.2150 mm)
Valve Stem-to-guide Clearance:
Intake: 0.020 - 0.045 in (0.0008 - 0.0018 mm)
Exhaust: 0.055 - 0.080 in (0.0022 - 0.0031 mm)
I know u only need the clearence part, but the rest is semi useful as well......
#4
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: Somewhere in South Philly, usa
Posts: 2,954
Likes: 0
Received 0 Likes
on
0 Posts
Re: 97 accord valve clearance specs? (ramoneguru)
Thanks fellaz, yeah I only needed the clearance. I did the valve adjustment .010 on the intake side and .012 on the exhaust but it seems to tap even louder now. I'll check again in the morning to see if their out of place. If not should I go .011 on the intake and .013 on the exh...?
Thread
Thread Starter
Forum
Replies
Last Post
wagon-r
Honda Accord (1990 - 2002)
1
06-11-2013 09:32 AM
B18ceed
Honda Accord (1990 - 2002)
6
02-22-2006 01:10 PM
DrunkNRacer
Honda Accord (1990 - 2002)
6
05-12-2003 07:36 AM