K20 into EG/EK, what axles to use?
#2
Honda-Tech Member
Join Date: Nov 2001
Location: California
Posts: 3,562
Likes: 0
Received 0 Likes
on
0 Posts
Re: K20 into EG/EK, what axles to use? (JustJeff)
Passenger side: 92+ Prelude shaft, B series outter, and K series inner. Trust me on this one.
Driver side: RSX axle with B series outter.
This setup works very good on EK/EG and DC2 swaps.
I know 3 people with this setup that take their cars to the track monthly.
Driver side: RSX axle with B series outter.
This setup works very good on EK/EG and DC2 swaps.
I know 3 people with this setup that take their cars to the track monthly.
#3
Re: K20 into EG/EK, what axles to use? (SuperTwinz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperTwinz »</TD></TR><TR><TD CLASS="quote">Passenger side: 92+ Prelude shaft, B series outter, and K series inner. Trust me on this one.
Driver side: RSX axle with B series outter.</TD></TR></TABLE>
Agreed. Aside from building your own axle, the only other solution is aftermarket pre-built ones.
Driver side: RSX axle with B series outter.</TD></TR></TABLE>
Agreed. Aside from building your own axle, the only other solution is aftermarket pre-built ones.
#5
Honda-Tech Member
iTrader: (2)
Re: K20 into EG/EK, what axles to use? (SuperTwinz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperTwinz »</TD></TR><TR><TD CLASS="quote">Passenger side: 92+ Prelude shaft, B series outter, and K series inner. Trust me on this one.
Driver side: RSX axle with B series outter.
This setup works very good on EK/EG and DC2 swaps.
I know 3 people with this setup that take their cars to the track monthly.</TD></TR></TABLE>
are ProFab axles made this way????
Driver side: RSX axle with B series outter.
This setup works very good on EK/EG and DC2 swaps.
I know 3 people with this setup that take their cars to the track monthly.</TD></TR></TABLE>
are ProFab axles made this way????
#7
Junior Member
Join Date: Nov 2003
Location: new york, united states
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Re: K20 into EG/EK, what axles to use? (SuperTwinz)
thanks alot guys ...this just got dropped on me today.... never thought i would be able to afford this motor swap.... so i havent gotten up on all the knowledge needed... once again thanks for the info
question: what would a d16y8 w/ 91xxx miles, new tranny and refinished clutch hav about 5000 miles be worth
question: what would a d16y8 w/ 91xxx miles, new tranny and refinished clutch hav about 5000 miles be worth
Thread
Thread Starter
Forum
Replies
Last Post
jdmem205
Honda Civic / Del Sol (1992 - 2000)
5
12-19-2012 10:08 PM