ltho1998

Okay, doing LS/VTEC and all the head bolts were fine except one. That one is frozen and stripped. Used my 500 ft-lb impact on it and it just wouldn't budge. Ripped up 6 craftsman impact sockets on them and eventually rounded out. So i bought these bolt extractors that have these barbs that cut into the bolt and that didn't work. I hammered a 13mm onto it-- still wouldn't budge, and the socket would slip. Can't get a dremel in there to cut off the head of the bolt. Any suggestions?

mr.beeks

drill it out the head will budge and take off the head and
deal with the rest..