Where to buy different sized brass fittings for use with the GE vaccum manifold????
#1
Honda-Tech Member
Thread Starter
Where to buy different sized brass fittings for use with the GE vaccum manifold????
I need to buy some of those fittings that scew into the vaccum manifold and have the male end sticking out so you can attach a vaccum line. Where can I get these? They are available in different sizes right?
TIA!
TIA!
#5
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RNPoo7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RNPoo7 »</TD></TR><TR><TD CLASS="quote">about to buy some tomorrow </TD></TR></TABLE>
About damn time
About damn time
#6
Re: Where to buy different sized brass fittings for use with the GE vaccum manifold???? (Turbo D17)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo D17 »</TD></TR><TR><TD CLASS="quote">Or any Ace Hardware</TD></TR></TABLE>
Yup, they have everything there.
Yup, they have everything there.
#7
Honda-Tech Member
Join Date: Apr 2003
Location: Hidin in a, cave
Posts: 7,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: (J. Davis)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J. Davis »</TD></TR><TR><TD CLASS="quote">
About damn time </TD></TR></TABLE>
haha, didn't know ur on here, damn my car is running like *** dawg. lol time for that tune
About damn time </TD></TR></TABLE>
haha, didn't know ur on here, damn my car is running like *** dawg. lol time for that tune
Trending Topics
#9
Honda-Tech Member
Join Date: Apr 2003
Location: Bitburg Germany
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B16CRXT)
I think you can buy for like $10-$11 comes with 6 barb fitting and tee for the boosterhttp://www.goldeneaglemfg.com/...de=VM
#11
Honda-Tech Member
Join Date: Apr 2003
Location: Hidin in a, cave
Posts: 7,160
Likes: 0
Received 0 Likes
on
0 Posts
i bought some fittings today, but i have a question about the main source for the GE manifold source. (The black fitting) Which hose do i use ?
Here's a pic just to help if needed:
Here's a pic just to help if needed:
#12
Honda-Tech Member
Join Date: May 2004
Location: Baltimore, MD, US
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RNPoo7)
if your asking where you pull the vacuum source from, then from the brake booster line. The big black line running from the intake manifold to the brake booster. That line has a one way valve in it so make sure you 'T' off before that valve. (closer to the intake manifold)
#14
Re: (RNPoo7)
Fitting Kit - (1) 3/8 Tee Nylon - (6) 1/8 Pipe x 3/16 Barb - Brass
Is 3/8 correct for our brake booster line?
And is 3/16 the same diameter Tial uses for their barbs?
Is 3/8 correct for our brake booster line?
And is 3/16 the same diameter Tial uses for their barbs?
#15
Honda-Tech Member
iTrader: (1)
Re: (tegunderpressure)
3/8 is correct for the brake booster line, although my line says 11/32 on it.
I run 1/4" ID fuel hose for all my vacuum needs in my engine bay - it's cheap, holds pressure rather well, and is available at any auto parts store. This seems to work fine for me on all my TiAL fittings. I'm using 1/8" NPT x 1/4" Hose barb fittings on my McMaster vacuum manifold to feed my boost/vacuum destinations.
I run 1/4" ID fuel hose for all my vacuum needs in my engine bay - it's cheap, holds pressure rather well, and is available at any auto parts store. This seems to work fine for me on all my TiAL fittings. I'm using 1/8" NPT x 1/4" Hose barb fittings on my McMaster vacuum manifold to feed my boost/vacuum destinations.
#16
Honda-Tech Member
Join Date: Feb 2003
Location: Margaritaville
Posts: 7,355
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DaX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaX »</TD></TR><TR><TD CLASS="quote">http://www.mcmaster.com has everything for great prices.</TD></TR></TABLE>
I just purchased all my fittings and vacuum manifold from McMaster Carr as well. Good prices.
I just purchased all my fittings and vacuum manifold from McMaster Carr as well. Good prices.
Thread
Thread Starter
Forum
Replies
Last Post