turbo manifold and dip stick
01-16-2004, 08:08 PM
#1
Thread Starter
Join Date: Dec 2003
Location: las vegas, NV
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
turbo manifold and dip stick
I have seen some turbo manifold where it covers the dip stick or block it. I notice this on the lovefabs sst and full race's. WHat do you guy do to check oil level?
01-17-2004, 06:52 AM
#6
Honda-Tech Member
Join Date: Jun 2001
Location: Northern, VA
Posts: 7,261
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo manifold and dip stick (pissedoffsol)
Looks like it would melt the handle 
Is there an aftermarket dip stick that has a longer handle than the OEM one?
Is there an aftermarket dip stick that has a longer handle than the OEM one?
Trending Topics
01-17-2004, 06:05 PM
#10
Re: turbo manifold and dip stick (shortyz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shortyz »</TD></TR><TR><TD CLASS="quote">i took a torch to mine heated it up redhot and bent it.
worked well. then ground the end so it would slide in bettter!
</TD></TR></TABLE>
you had to heat up the dip stick to bend it? it's almost as small as a wire coathanger
worked well. then ground the end so it would slide in bettter!
</TD></TR></TABLE>you had to heat up the dip stick to bend it? it's almost as small as a wire coathanger
01-18-2004, 09:40 PM
#12
Honda-Tech Member
Join Date: Jan 2001
Posts: 2,780
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo manifold and dip stick (c jackson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by c jackson »</TD></TR><TR><TD CLASS="quote">your gunna want to take that rubber deal off of the dipstick, it will just burn away and make somethin messy. </TD></TR></TABLE>
even though it looks like it- its not touching the manifold at all...
even though it looks like it- its not touching the manifold at all...
01-18-2004, 10:38 PM
#13
Honda-Tech Member
Join Date: Jun 2001
Location: Northern, VA
Posts: 7,261
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo manifold and dip stick (shortyz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shortyz »</TD></TR><TR><TD CLASS="quote">i took a torch to mine heated it up redhot and bent it.
worked well. then ground the end so it would slide in bettter! </TD></TR></TABLE>
haha, weak sauce
worked well. then ground the end so it would slide in bettter!
</TD></TR></TABLE>haha, weak sauce
Thread
Thread Starter
Forum
Replies
Last Post
