Mr. Vapor

Care to share what your axle/tire/tranny/traction bar set up is?

im starting to build up the next weakest link and i dont dare launch on my OEM axles on slicks.

just curious to see if all the 'stories' ive heard are just myths or indeed facts.

quicksilver1689

If your car is capable of running 11 secound 1/4 miles then you should very well look into the drivetrain setup. Oem axles can take a beating but its just a matter of time before they break and leave u screwed. Full race or z10 traction bars, maybe some stage 3 axles, gsr tranny is always nice with boost.

Mr. Vapor

to late....broke (well more like bent/tweaked my inner joint) the other night and now im rebuilding but im looking to set up a plan of purchases, not just buy the wrong parts. whats been proven to work.

fjt

i know i havent run 11s yet but the car has the opotential to do it..

Anyways...
Stock Axles, no traction bars, 22 X 8 13" rim MH Slicks.. Y8 tranny.

Have another friend with same setup and 11.8sec runs with Stock axles,no traction bars and slicks

boostedcivicsir

First Off i broke an inner on the pass side this weekend at atco, but glen is going to warranty it. every pass up untill the last one was fast shifting, off gas in clutch, off clutch in gas. the pass i broke mine was on the 1-2 gas to the floor push clutch yank. so on to my setup:

axles:
gator racing stage III modifieds
clutch:
exedy twin
diff:
quaife
tranny:
all stock but gearspeed syncros
bars:
full race
slicks:
24.5 x 8.5 x 15 m&h racemasters
rims:
15 x 8 bogart I 10's
suspension:
progress drag

best 60' 1.68 in my 10.72 run.

mrbsponge

DSS stage 3s
ITR diff
KYB AGXs
**WEAPON R COILOVERS** hahaha


1.61 60ft

JDMs1eeper

I ran stock OEM axles for 2 years on 130+ launches on slicks. Many are 1.75 or faster 60ft times. No traction bars. Best 60fts were 1.68-1.69 .

LS turbo, LS tranny, Launch control at 6,000
25x8x13 M&H slicks w/ 9psi of pressure.
7,800rpm revlimit

Ran 11.3 @ 124 w/ no 4th gear switching to a lovely LS 5th gear

2LiterTurboSeR

A friend running a turbo LS Hatch running stock axles, ls tranny and no other traction mods on 24.5 slicks went 11.65 @ 118 with a 1.7 60 ft.

H.A.R.T B18C1EG6

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrbsponge &raquo;</TD></TR><TR><TD CLASS="quote">DSS stage 3s

**WEAPON R COILOVERS** hahaha


1.61 60ft</TD></TR></TABLE>

haha that actually made me laugh

nice 60ft...

mrbsponge

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 &raquo;</TD></TR><TR><TD CLASS="quote">

haha that actually made me laugh

nice 60ft... </TD></TR></TABLE>

thanks, the coilovers came with the car when i bought it.

i have some custom rate ground controls for it, for drag racing but im scared to change the set up cause it works so well

no traction bars either, people talk about wheel hop but i guess i either havent experienced it or just dont know i have...... i like thge car to spin just a tad, it helps keep from breaking stuff


also i use the Ebrake/staging brake to preload the car

vaporboy12

gator stage 2s
gsr tranny open diff
exedy twin
24.5x9x13 mt's
13x3 weld racelights
omni drag suspension full-race pro-ams not installed yet
10.65@135 1.79 60foot
60 should be runner but that was my first pass in the car this season... 20psi straight out of the hole due to no boost controller

RyanEJ8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Vapor &raquo;</TD></TR><TR><TD CLASS="quote">Care to share what your axle/tire/tranny/traction bar set up is?

im starting to build up the next weakest link and i dont dare launch on my OEM axles on slicks.
just curious to see if all the 'stories' ive heard are just myths or indeed facts.

</TD></TR></TABLE>

I haven't run 11's yet, but I can tell you that slicks are easier on axles than street tires. Street tires can tend to hop which is what really kills axles.

mrbsponge

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanCivic2000 &raquo;</TD></TR><TR><TD CLASS="quote">

I haven't run 11's yet, but I can tell you that slicks are easier on axles than street tires. Street tires can tend to hop which is what really kills axles.</TD></TR></TABLE>


very true, and more people break axles on drag radials as well, due to the NON wrinkleing effect and weight, DRs are heavy

.RTErnie

Koni adj. struts
ebay coilovers/ H&R Racing springs
M&H 25x9x13 slicks
Diamond racing wheels 13x8
DSS Stage 3 axles
near solid motor mounts
PG Locker
3.55 transmission

the thing that kept me from breaking axles...proper engine alignment in the chassis...keeping the motor from rocking/moving, keeping the axles perfectly perpendicular to the trans case, etc

Thing that helped my 60' the most...corner balancing my car.

1.66 60' and did a 7.5@99

i later did a 11.80@124 (only 1 pass and it was shitty)

JDMs1eeper

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanCivic2000 &raquo;</TD></TR><TR><TD CLASS="quote">I haven't run 11's yet, but I can tell you that slicks are easier on axles than street tires. Street tires can tend to hop which is what really kills axles.</TD></TR></TABLE>

yeah, my friend in the past 2 months has broken 2 diff's and 5 sets of axles on his BFG's. including a set of stage3 axles.

ran a 10.98 @ 127 on slicks w. stock axles and stock open diff.

turbotime

tim you just dont know how to drive!


OEM axles are fine just get teh autozones and some traction bars and youll be good. My guess is the axles dont break becuase of shear power its cause of the wheel hop and the angle they are being forced into that they are breakin....

but if im wrong i say stage 3 axles

DaveF

mt 28x10.5's, advance design coilovers, home made traction bars/ and wheelie bars 1.38 60ft. leaving @ 7200 around 10-15 psi out of the hole.

http://www.nitrodriveline.com best **** around.

Boostin Ex

I run Tein SS coilover, stock axels, stock jdm lsd, clutch specialties clutch, M/T 24.5x9x13 slicks my car went 11.3 @130mph with a crappy 60ft