Oil Feed Question
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Dirty 3rd, Tx, USA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Oil Feed Question
I have been searching and I see that people say that -4 feed line will blow turbo seals because of pressure and -3 is perfect. In reality wouldn't a smaller line cause more pressure then the bigger line? Im not sure. I already bought a -4 trying to find out if I should switch to -3.
#3
Re: Oil Feed Question (Redwidow)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redwidow »</TD></TR><TR><TD CLASS="quote">Its the volume that actually floods the gravity drain back into your pan. Not the pressure. Switch to a AN-3 </TD></TR></TABLE>
#6
Honda-Tech Member
Join Date: Jun 2003
Location: Mesa, Az, USA
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mchuang)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mchuang »</TD></TR><TR><TD CLASS="quote">So your saying a -4 line floods the return causing oil to sit in the turbo waiting to be returned basically.</TD></TR></TABLE>
Yes
Yes
Thread
Thread Starter
Forum
Replies
Last Post
pelotudo
Forced Induction
2
08-18-2002 06:31 PM