Need big help for tuning power fc
11-11-2004, 12:20 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Malta, Europe, Europe
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Need big help for tuning power fc
I have bought a power fc from a guy on this forum,it is already mapped but it came without the map sensor.
How can i know which map sensor he was using so i can use the ecu?
I already called him,power excel and the guy who built the engine,xs engineering but with no result.
I have the fc commander,can i check from it the voltage or something that can help to find which map was using?
What can i do ,i need a big help from you as usual guys,thanks
How can i know which map sensor he was using so i can use the ecu?
I already called him,power excel and the guy who built the engine,xs engineering but with no result.
I have the fc commander,can i check from it the voltage or something that can help to find which map was using?
What can i do ,i need a big help from you as usual guys,thanks
11-11-2004, 01:28 PM
#2
Junior Member
Join Date: Jul 2002
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need big help for tuning power fc (JDM97R)
just go into the settings menu and select PIM Volt. There you will see #1-#5 options ( not sure ,maybe #1-#4). anyway see which option is high-lighted. if #1 is high lighted, then it is the honda Map Sensor. If is the last option, it is a GM Map Sensor.
Thread
Thread Starter
Forum
Replies
Last Post
