mushroom intake
#26
Member
Thread Starter
Join Date: Dec 2001
Location: FIVE.ZERO.THREE
Posts: 5,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: (accord20o1)
The filters were tested on the quality of the filtration, simulated by using a vacuum cleaner and millions of microscopic dirt particles. The particles that penetrated the air filter, were collected on a secondary paper filter, so that a fair comparison could be performed, and the results could be compared like for like. As well as the fine particle test, the performance gains were also measured using each of the induction kits in the test. Therefore, in the quest to find the ultimate induction kit, the filters must not only filter the particles out efficiently, but must maximize the amount of clean air flow, through the filter. The winner would be the induction kit that filters the most dirt particles, whilst acheiving the maxmimum power output of the vehicle.
Blitz Sus- Zero Maintenance - Lifetime Use.
HKS mega flow- Throw away. Change Filter every 10,000 Miles.
Apexi power intake- Zero Maintenance - Lifetime Use.
K&N filtercharger- Lifetime Usage - Inspect every 30,000 Miles or 12 Months - Clean and re-oil, if appropriate.
From mkiv.com
Blitz Sus- Zero Maintenance - Lifetime Use.
HKS mega flow- Throw away. Change Filter every 10,000 Miles.
Apexi power intake- Zero Maintenance - Lifetime Use.
K&N filtercharger- Lifetime Usage - Inspect every 30,000 Miles or 12 Months - Clean and re-oil, if appropriate.
From mkiv.com
#27
Re: (envision2teg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by envision2teg »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
#28
Member
Thread Starter
Join Date: Dec 2001
Location: FIVE.ZERO.THREE
Posts: 5,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TeamCracka)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeamCracka »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
yea i was workin on it....
#30
Honda-Tech Member
Join Date: Sep 2002
Location: Springfield, PA, U.S
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tgh99si)
Yup, K&N's come oiled. The oil is red, that's what the red color is when you get it brand new. After you wash it it will be white before you re-oil it because it's just cotton.
#31
Re: (Eluder200K)
ok just wanted to make sure, cause the breather filter came white and a pouch of oil, but the air filter didnt come with the oil but it was red, you can never be too sure
#34
Honda-Tech Member
Re: (S03Burner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by S03Burner »</TD></TR><TR><TD CLASS="quote">Ive been using an HKS mushroom for 5 years. I wash the dirt off with water and soap every couple months and replace the fitler element every couple years.
It hasnt failed me yet. HKS mushroom </TD></TR></TABLE>
same here, but i know those foam filter doesnt filter at all.
well, it's for my beater, and the replacement hks insert is 20 bucks only.
hks dont recommend washing it tho'
It hasnt failed me yet. HKS mushroom </TD></TR></TABLE>
same here, but i know those foam filter doesnt filter at all.
well, it's for my beater, and the replacement hks insert is 20 bucks only.
hks dont recommend washing it tho'
#35
Honda-Tech Member
Re: (tgh99si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tgh99si »</TD></TR><TR><TD CLASS="quote">screen or pantyhose?</TD></TR></TABLE>
both are bad idea, i lost about 2psi of boost because of the screen mesh clamp on's.
both are bad idea, i lost about 2psi of boost because of the screen mesh clamp on's.
#37
Junior Member
Join Date: Jul 2003
Location: Viaka Heaven
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tgh99si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tgh99si »</TD></TR><TR><TD CLASS="quote">i know its not good but if you have no room, you know what i mean</TD></TR></TABLE>
I am unable to find one that is thin enough so i think i might be forced to try to build a fiberglass air intake box.
I am unable to find one that is thin enough so i think i might be forced to try to build a fiberglass air intake box.
#45
Honda-Tech Member
Re: (5thgencivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 5thgencivic »</TD></TR><TR><TD CLASS="quote">My cheap ebay $15 filter has been working good for me so far
</TD></TR></TABLE>
your manifold proly costs about 800 bucks, turbo costs about 600 bucks,
and yet you use a crappy generic filter!
</TD></TR></TABLE>
your manifold proly costs about 800 bucks, turbo costs about 600 bucks,
and yet you use a crappy generic filter!
#46
Member
Thread Starter
Join Date: Dec 2001
Location: FIVE.ZERO.THREE
Posts: 5,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: (igo4bmx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by igo4bmx »</TD></TR><TR><TD CLASS="quote">
your manifold proly costs about 800 bucks, turbo costs about 600 bucks,
and yet you use a crappy generic filter! </TD></TR></TABLE>
looks like that is all he had room for.
its pretty obvious that the generic vs. HKS isnt much diff.
BTW: I still gotta see your car man, I fugure Ill see you flyin around corvallis sometime soon Corvallis meet??? hahaha
your manifold proly costs about 800 bucks, turbo costs about 600 bucks,
and yet you use a crappy generic filter! </TD></TR></TABLE>
looks like that is all he had room for.
its pretty obvious that the generic vs. HKS isnt much diff.
BTW: I still gotta see your car man, I fugure Ill see you flyin around corvallis sometime soon Corvallis meet??? hahaha
#49
Honda-Tech Member
Re: (CRX T-Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRX T-Si »</TD></TR><TR><TD CLASS="quote">It's only a name man.
No matter if it's K&N, HKS or what ever it's mostly that **** was made in CHINA.
If it works then it works.</TD></TR></TABLE>
did anyone even bother looking at the filter review poster on page one?
filter is not just another filter
No matter if it's K&N, HKS or what ever it's mostly that **** was made in CHINA.
If it works then it works.</TD></TR></TABLE>
did anyone even bother looking at the filter review poster on page one?
filter is not just another filter