Matt from One-Fab (sorry, no tech info here).
03-07-2006, 11:40 AM
#52
Honda-Tech Member
Re: (nsxmatt)
After looking around on that site I guess this is what he's been doing...
http://www.houston-imports.com...78746
http://www.houston-imports.com...78746
03-07-2006, 12:11 PM
#53
Member
Join Date: Sep 2001
Location: Texas
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
Re: (nsxmatt)
I've been on here a while and seen my share of scams. Seems like every couple of years someone with a welder realizes quite a bit of money can be made fabbing manifolds. Orders start to pill up, money gets transfered, and usually that is followed by...I never recieved my product.
It's happened time and time again on this board. My frame of mind was that, he should be behind a welder not beside a dyno.
It's happened time and time again on this board. My frame of mind was that, he should be behind a welder not beside a dyno.
03-07-2006, 12:17 PM
#54
Honda-Tech Member
Re: (rondigs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rondigs »</TD></TR><TR><TD CLASS="quote"> My frame of mind was that, he should be behind a welder not beside a dyno. </TD></TR></TABLE>
Sorry, the way you worded it you were defending On-Fab. Sorry about that
Sorry, the way you worded it you were defending On-Fab. Sorry about that
03-07-2006, 12:42 PM
#55
Honda-Tech Member
Re: (nsxmatt)
First off - Matt's not a scammer, and y'all who don't even know him, well, then don't throw in your two cents just to hate for the heck of it. I'm not saying someone doesn't have the right to request shipment of their parts if something's taken longer than expected, but Matt's a stand-up guy and is not out to jerk anyone around.
I'm not speaking on his behalf, but I do know him as a respectable man.
I'm not speaking on his behalf, but I do know him as a respectable man.
03-07-2006, 12:58 PM
#56
Honda-Tech Member
Re: (civperc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civperc »</TD></TR><TR><TD CLASS="quote">and y'all who don't even know him, well, then don't throw in your two cents just to hate for the heck of it.</TD></TR></TABLE>
And y'all that ride his nuts don't try to make Matt out as the victim. Nobody cares how much of a good guy Matt is in person, he's taken thousands of dollars of peoples hard earned money and given no product. If you can call someone who does that a "good guy" then your opinion on the subject is useless.
And y'all that ride his nuts don't try to make Matt out as the victim. Nobody cares how much of a good guy Matt is in person, he's taken thousands of dollars of peoples hard earned money and given no product. If you can call someone who does that a "good guy" then your opinion on the subject is useless.
03-07-2006, 01:00 PM
#57
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2005
Location: from the 704 to the 919
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civperc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civperc »</TD></TR><TR><TD CLASS="quote">First off - Matt's not a scammer, and y'all who don't even know him, well, then don't throw in your two cents just to hate for the heck of it. I'm not saying someone doesn't have the right to request shipment of their parts if something's taken longer than expected, but Matt's a stand-up guy and is not out to jerk anyone around.
I'm not speaking on his behalf, but I do know him as a respectable man.</TD></TR></TABLE>
That's all fine and dandy, but a year?! I mean, c'mon....that's just rediculous.
AN ENTIRE YEAR --> 4 seasons --> 12 months --> 52 weeks --> 365 days --> 8760 hours........whatever you want to call it. That is an unfathomably long amount of time for a manifold to be made. The fact that you think he is a "stand-up guy" doesn't justify anything.
I got my Spoolin manifold, downpipe, and dumptube, in less than 6 weeks....and he was busy as hell at the time too!
I'm not speaking on his behalf, but I do know him as a respectable man.</TD></TR></TABLE>
That's all fine and dandy, but a year?! I mean, c'mon....that's just rediculous.
AN ENTIRE YEAR --> 4 seasons --> 12 months --> 52 weeks --> 365 days --> 8760 hours........whatever you want to call it. That is an unfathomably long amount of time for a manifold to be made. The fact that you think he is a "stand-up guy" doesn't justify anything.
I got my Spoolin manifold, downpipe, and dumptube, in less than 6 weeks....and he was busy as hell at the time too!
03-07-2006, 05:42 PM
#58
Honda-Tech Member
Join Date: Nov 2001
Location: Goodluck Finding Me
Posts: 2,953
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civperc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civperc »</TD></TR><TR><TD CLASS="quote">First off - Matt's not a scammer, and y'all who don't even know him, well, then don't throw in your two cents just tohate for the heck of it . I'm not saying someone doesn't have the right to request shipment of their parts if something's taken longer than expected, but Matt's a stand-up guy and is not out to jerk anyone around.
I'm not speaking on his behalf, but I do know him as a respectable man.</TD></TR></TABLE>
People are "hating" because they paid and havent received **** from him.He's the one that says "3-4 weeks" then doesnt come through. Even when they get their **** they still have a right to be pissed because it took 12x as much time as it was supposed to take...
I'm not speaking on his behalf, but I do know him as a respectable man.</TD></TR></TABLE>
People are "hating" because they paid and havent received **** from him.He's the one that says "3-4 weeks" then doesnt come through. Even when they get their **** they still have a right to be pissed because it took 12x as much time as it was supposed to take...
03-08-2006, 10:35 AM
#59
Honda-Tech Member
Join Date: Aug 2005
Location: bakersfield, CA, USA
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Re: (civperc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civperc »</TD></TR><TR><TD CLASS="quote">First off - Matt's not a scammer, and y'all who don't even know him, well, then don't throw in your two cents just to hate for the heck of it. I'm not saying someone doesn't have the right to request shipment of their parts if something's taken longer than expected, but Matt's a stand-up guy and is not out to jerk anyone around.
I'm not speaking on his behalf, but I do know him as a respectable man.</TD></TR></TABLE>
this reminds me...I dont remember who said it...but it went something like this...you dont go to one taco bell and wait 45 min for a soft taco when the taco bell down the street will give it to you in 10 and expect to hear an excuse like, "phils a good guy, hes just backed up on soft shells right now...." Once again this isnt a debate on his personality i thought we got through this on the last thread...im about tired of everyone coming on here and making these threads about his personality. I dont care if hes respectable, i dont care you you think hes a "stand up guy", expletive for all i care go marry the *******...the point is...he has NO BUSINESS ETHICS! and this is the point i think many of us are trying to get out to people.
I'm not speaking on his behalf, but I do know him as a respectable man.</TD></TR></TABLE>
this reminds me...I dont remember who said it...but it went something like this...you dont go to one taco bell and wait 45 min for a soft taco when the taco bell down the street will give it to you in 10 and expect to hear an excuse like, "phils a good guy, hes just backed up on soft shells right now...." Once again this isnt a debate on his personality i thought we got through this on the last thread...im about tired of everyone coming on here and making these threads about his personality. I dont care if hes respectable, i dont care you you think hes a "stand up guy", expletive for all i care go marry the *******...the point is...he has NO BUSINESS ETHICS! and this is the point i think many of us are trying to get out to people.
03-08-2006, 10:43 AM
#60
Honda-Tech Member
Join Date: Jul 2001
Location: GO LEAFS GO, NY, USA
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Hybrid_Coupe)
This is getting so old.
I think the worst part about this whole thing is that Matt wont come on here and at least BE A ******* MAN and apologize. that alone would win over alot of people.
it could be as simple as "Hey guys, i truely apologize for all of this....i want you all to know that im aware of the problem and im doing my best to right the situation"
at least this would show hes aware instead of turning a deaf ear.
I think the worst part about this whole thing is that Matt wont come on here and at least BE A ******* MAN and apologize. that alone would win over alot of people.
it could be as simple as "Hey guys, i truely apologize for all of this....i want you all to know that im aware of the problem and im doing my best to right the situation"
at least this would show hes aware instead of turning a deaf ear.
03-08-2006, 11:04 AM
#61
Honda-Tech Member
Join Date: Nov 2001
Location: Goodluck Finding Me
Posts: 2,953
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mr. Vapor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Vapor »</TD></TR><TR><TD CLASS="quote">This is getting so old.
I think the worst part about this whole thing is that Matt wont come on here and at least BE A ******* MAN and apologize. that alone would win over alot of people.
it could be as simple as "Hey guys, i truely apologize for all of this....i want you all to know that im aware of the problem and im doing my best to right the situation"
at least this would show hes aware instead of turning a deaf ear. </TD></TR></TABLE>
His **** has gone so far, that appologies and excuses aint going to help at all. He needs to get those manifolds out or start refunding money.
I think the worst part about this whole thing is that Matt wont come on here and at least BE A ******* MAN and apologize. that alone would win over alot of people.
it could be as simple as "Hey guys, i truely apologize for all of this....i want you all to know that im aware of the problem and im doing my best to right the situation"
at least this would show hes aware instead of turning a deaf ear. </TD></TR></TABLE>
His **** has gone so far, that appologies and excuses aint going to help at all. He needs to get those manifolds out or start refunding money.
03-08-2006, 11:20 AM
#62
Re: (nsxmatt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxmatt »</TD></TR><TR><TD CLASS="quote">After looking around on that site I guess this is what he's been doing...
http://www.houston-imports.com...78746</TD></TR></TABLE>
love his avatar over there. he must not like them because they actually deliver thier products and he cant.
http://www.houston-imports.com...78746</TD></TR></TABLE>
love his avatar over there. he must not like them because they actually deliver thier products and he cant.
03-08-2006, 12:47 PM
#63
Honda-Tech Member
Join Date: Jul 2001
Location: GO LEAFS GO, NY, USA
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EVIL Hx Coupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EVIL Hx Coupe »</TD></TR><TR><TD CLASS="quote">
His **** has gone so far, that appologies and excuses aint going to help at all. He needs to get those manifolds out or start refunding money.</TD></TR></TABLE>
no no i hear ya man. it was just me trying to tell him to at least stop being a ***** and MAN UP and chime in here instead of hiding like a bitch.
the totally ironic part is....i'll be running a 1fab manifold and downpipe this year...i got it used from my boy Brett but im almost ashamed to run it this year lol
His **** has gone so far, that appologies and excuses aint going to help at all. He needs to get those manifolds out or start refunding money.</TD></TR></TABLE>
no no i hear ya man. it was just me trying to tell him to at least stop being a ***** and MAN UP and chime in here instead of hiding like a bitch.
the totally ironic part is....i'll be running a 1fab manifold and downpipe this year...i got it used from my boy Brett but im almost ashamed to run it this year lol
03-08-2006, 02:48 PM
#66
Honda-Tech Member
Thread Starter
Join Date: Oct 2004
Location: Sacramento, CA, USA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
I clicked on "Forced Induction" and found this thread on the first page again. I don't want his parts, didn't want them for a while. I just wanted this problem solved with the least amount of hassle; it's not going to work that way. People, please let this thread die, because I don't care about it anymore. Hopefully, this thread will get to the archives though, so others can read it. The claim has been filed and I found somebody to serve him the summon. Thanks for the sympathies and learn from my mistake. Good luck to all involved with this bullshit.
Modified by preludeserge at 4:02 PM 3/8/2006
Modified by preludeserge at 4:02 PM 3/8/2006
03-08-2006, 05:00 PM
#68
Honda-Tech Member
Join Date: Aug 2005
Location: bakersfield, CA, USA
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Re: (preludeserge)
why would we let the thread die...these people havent gotten their parts..and obviously matt hasnt contacted them...i think it needs to be up at the top...people want their money or their parts...
03-08-2006, 11:46 PM
#69
Join Date: Oct 2002
Location: ATX/HTX
Posts: 2,976
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mr. Vapor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Vapor »</TD></TR><TR><TD CLASS="quote">This is getting so old.
I think the worst part about this whole thing is that Matt wont come on here and at least BE A ******* MAN and apologize. that alone would win over alot of people.
it could be as simple as "Hey guys, i truely apologize for all of this....i want you all to know that im aware of the problem and im doing my best to right the situation"
at least this would show hes aware instead of turning a deaf ear. </TD></TR></TABLE>
Heres my post just for you.
I had no intention on posting on here for numerous reasons.
First of all, Every other thread All ive done is appologize and yet it makes no difference. Everyone seems to know me and Claim im this or that.
Im not here to rip anyone off in any way most of all. All it does when i see this **** is **** me off and irritate me that people say im a scammer. Given some people ahev waited way longer than others for whatever reason it may be, i have not ripped anyone off nor do intend to.
Say what you want, It doesnt make a bit of difference.
so ill just do away with the added frustration of all this **** talking and keep working on getting customers parts out as fast as I can.
Just because I dont post here kissing everyones *** doesnt mean im blowing customers off. Just you ******** that have never dealt with me but yet have so much to say.
Most of all, The majority of these posts originate from a customer being pissed at me and claims they cant get ahold of me. Then these posts come along claiming thats the only way to get my attention. When I never ever hear from a customer, not a voicemail, not an email, not a PM, nothing but a **** talking post on HT. Thats bullshit, Talking **** is not a way to make me send your parts out any quicker.
I do what i can and offer to make up for what i cant.
-Matt
I think the worst part about this whole thing is that Matt wont come on here and at least BE A ******* MAN and apologize. that alone would win over alot of people.
it could be as simple as "Hey guys, i truely apologize for all of this....i want you all to know that im aware of the problem and im doing my best to right the situation"
at least this would show hes aware instead of turning a deaf ear. </TD></TR></TABLE>
Heres my post just for you.
I had no intention on posting on here for numerous reasons.
First of all, Every other thread All ive done is appologize and yet it makes no difference. Everyone seems to know me and Claim im this or that.
Im not here to rip anyone off in any way most of all. All it does when i see this **** is **** me off and irritate me that people say im a scammer. Given some people ahev waited way longer than others for whatever reason it may be, i have not ripped anyone off nor do intend to.
Say what you want, It doesnt make a bit of difference.
so ill just do away with the added frustration of all this **** talking and keep working on getting customers parts out as fast as I can.
Just because I dont post here kissing everyones *** doesnt mean im blowing customers off. Just you ******** that have never dealt with me but yet have so much to say.
Most of all, The majority of these posts originate from a customer being pissed at me and claims they cant get ahold of me. Then these posts come along claiming thats the only way to get my attention. When I never ever hear from a customer, not a voicemail, not an email, not a PM, nothing but a **** talking post on HT. Thats bullshit, Talking **** is not a way to make me send your parts out any quicker.
I do what i can and offer to make up for what i cant.
-Matt
03-09-2006, 12:50 AM
#70
Honda-Tech Member
Join Date: Aug 2005
Location: bakersfield, CA, USA
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
funny you never offered to make anything up to us? we called, left voice mails...pm's and you said we were bugging you too much....Now you claim that no one calls you and all you get is these "**** talking posts" to get your attention...Maybe you should get your head outta your *** and learn some god damn customer service...
I never said you were out to rip anyone off...in fact in the first post about you after i made mine...i stated that i didnt think you were a scammer and that you made a quality product...ill give praise where its due...But you need to learn...your not earning any customers, nor making your current customers happy with your ethics and practices...i think you should think about that before calling your own customers "**** talkers."
now i know your post wasnt directed at me, but i take offense to your last post...which this is probably pointless for me to say because obviously you only read what suits your needs, and that you can pick apart. I dont think you need to come on here kissing ***, thats not what people are asking you to do...they are asking you to come on here and be honest. Think about that before coming on here and trying to tear someone up thinking your never wrong in your actions.
I never said you were out to rip anyone off...in fact in the first post about you after i made mine...i stated that i didnt think you were a scammer and that you made a quality product...ill give praise where its due...But you need to learn...your not earning any customers, nor making your current customers happy with your ethics and practices...i think you should think about that before calling your own customers "**** talkers."
now i know your post wasnt directed at me, but i take offense to your last post...which this is probably pointless for me to say because obviously you only read what suits your needs, and that you can pick apart. I dont think you need to come on here kissing ***, thats not what people are asking you to do...they are asking you to come on here and be honest. Think about that before coming on here and trying to tear someone up thinking your never wrong in your actions.
03-09-2006, 03:24 AM
#71
Honda-Tech Member
Join Date: Jul 2001
Location: GO LEAFS GO, NY, USA
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Hybrid_Coupe)
ok buddy....."you keep working on getting the customers their parts AS FAST AS I CAN"
Does anyone else find this completely comical? lmao
let me know when 10 months rolls around
Modified by Mr. Vapor at 2:39 PM 3/9/2006
Does anyone else find this completely comical? lmao
let me know when 10 months rolls around
Modified by Mr. Vapor at 2:39 PM 3/9/2006
03-09-2006, 05:10 AM
#72
Honda-Tech Member
Join Date: Nov 2003
Location: Indiana, USA
Posts: 3,107
Likes: 0
Received 0 Likes
on
0 Posts
I think the best thing for him to do in this situation is to stop taking orders and complete all his current ones. Then once he has completely caught uo he can start taking orders and only the amount he knows he can handle. This would lead to a MUCH better reputation and faster turn around on products.
03-09-2006, 05:22 AM
#73
Honda-Tech Member
Join Date: Sep 2003
Location: Where thieves get shot in the face,, texas, usa
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SOHCD16y8)
I bet if he stopped taking orders he would go out of business. Because, The money for the other manifolds is already gone!
03-09-2006, 08:58 AM
#75
New User
Join Date: Mar 2001
Posts: 12,296
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TTE TEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TTE TEG »</TD></TR><TR><TD CLASS="quote">Blah, blah, blah......I just want my damn parts already! DAMN!</TD></TR></TABLE>
Rich
I spoke to Matt on AIM two days ago, he states he tried to get the mani and dp out last week BUT needed some elbows to finish. He is working on your stuff now and stated should be going out by the end of the week. :Crossing fingers:
Rich
I spoke to Matt on AIM two days ago, he states he tried to get the mani and dp out last week BUT needed some elbows to finish. He is working on your stuff now and stated should be going out by the end of the week. :Crossing fingers: