Making my own resistor box
10-10-2002, 03:53 AM
#1
Thread Starter
Join Date: May 2002
Location: Houston, tx, usa
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Making my own resistor box
does anyone have the part numbers for the radio shack resistors 10ohm 20watt? or have a picture i dont want to go in there sounding like a dumbass...thanks 
10-10-2002, 12:14 PM
#3
Member
Join Date: Aug 2002
Posts: 1,452
Likes: 0
Received 0 Likes
on
0 Posts
Re: Making my own resistor box (Blackcivic1)
see the white things on top of the fuel rail... those are it... dont know about part numbers... but every radio shack i have been to has them... usually in the back and in the bins...
[Modified by 1.8T_EG, 2:14 PM 10/10/2002]
[Modified by 1.8T_EG, 2:14 PM 10/10/2002]
10-10-2002, 12:27 PM
#4
Honda-Tech Member
Join Date: Feb 2002
Location: Dandridge, TN, USA
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
Re: Making my own resistor box (Blackcivic1)
install instructions...
https://honda-tech.com/zerothread?id=216710
i believe they are 10watt though. anyway, part number...
http://www.radioshack.com/product.as...5Fid=271%2D132
https://honda-tech.com/zerothread?id=216710
i believe they are 10watt though. anyway, part number...
http://www.radioshack.com/product.as...5Fid=271%2D132
10-10-2002, 12:50 PM
#5
New User
Join Date: May 2001
Location: Des Plaines, IL, USA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: Making my own resistor box (Jeff C)
Just my .02, use a power resistor that can be attach to a some kind of heat sink, those kind of resistor in the picture will not dissipate the heat so much.
Thread
Thread Starter
Forum
Replies
Last Post
