CamJohns122

I have a DIY turbo kit on a obd1 b18b1 using a
Garrett Super 60 t3/t4
Walbro 255lph fuel pump
450cc DSM injectors
Tial 35mm wastegate
FPR
BOV
AEM Wideband
Emanage Blue

Im on a budget so i purchased the emanage. I dont want any responses flaming the emanage as its what im using so i dont have any other options.

I need some help, ive gotten the emanage hooked up and also have the support tool with it.
At idle the wideband is reading lean off the scale and it only stays idling for about 30seconds before just dying out. Running pretty rough, AFR drops to 15 when i hit the gas to keep it running. This seems to tell me im running lean.

I go into my injection map and add more fuel but still same problem still running lean.

Can someone either help me out as im not 100%positive how to tune or use emanage

or even better email me a basemap or chart of what to set the injection map at, the air flow adjustment map at etc.

Help is GREATLY appreciated

Email soccer_star122@hotmail.com