jacob4lester

my set up is a drag manifold with a turbonetics t3t4 turbo. can anyone provide me a link for a good priced downpipe that will connect right to where my cat is supposed to be (currently using a megan test pipe). im not sure exactly what the bolt pattern is off the top off my head and im sure a lot of you are way more familiar with it then me, any help is appreciated!

Gb-lude

think custom is ur best option.. don't even know if they have them off the shelf..

Kyle R

iTrader: (1)

I agree.

jacob4lester

i have seen some on ebay that look pretty similiar but i am just worried if i get it the bolt pattern will not be the same

TheShodan

iTrader: (14)

Find one from a Drag kit for your application, or one may have to be custom made based upon the turbocharger used. (5 bolt vs. 4 bolt)

teddy_dc2

i hate the drag down pipe, with a/c still on it was a pain and the 5 bolt made it worse. i did a v band off the 5 bolt on my current setup cause i hated it so much.

TheShodan

iTrader: (14)

No kidding. I hated that 5 bolt turbine housing. I'll cut a downpipe up to make sure that it fits w/ a v-band before I go to a 5 bolt again.