Clutch and Flywheel combo setup for Gsr 400hp range
#1
Honda-Tech Member
Thread Starter
Clutch and Flywheel combo setup for Gsr 400hp range
Ive been reading through lots of threads and im down to a Exedy flywheel b/c its steel and i think that is safer then aluminum F1 and others.
As for the clutch im a little torn b/c there are so many i want one that has the oem feel b/c ill never be taking it to the strip and its a daily driver that will never be abused but i don't want any slip in case im hitting 20psi boost and it will be close to 400-450hp i suspect after tune on built gsr motor.
1. Exedy Stage II
2. Clutchmasters FX400
3.stage 3 Comp Clutch
Which do you guys recommend and have had the most success with.
Thanks
As for the clutch im a little torn b/c there are so many i want one that has the oem feel b/c ill never be taking it to the strip and its a daily driver that will never be abused but i don't want any slip in case im hitting 20psi boost and it will be close to 400-450hp i suspect after tune on built gsr motor.
1. Exedy Stage II
2. Clutchmasters FX400
3.stage 3 Comp Clutch
Which do you guys recommend and have had the most success with.
Thanks
#2
Man U FTW
Re: Clutch and Flywheel combo setup for Gsr 400hp range
I have Comp. Stage 4 and like it. I daily my GSR and dont mind the clutch pressure or the engagement of it...
#3
Honda-Tech Member
Re: Clutch and Flywheel combo setup for Gsr 400hp range
Since it's never going to be abused I'm sure a stock clutch will work just fine. I'd classify a high rev launch as abuse. If you're just easing into the throttle and not abusing it stock will work just fine.
#4
Junior Member
Join Date: Nov 2007
Location: Co Springs, CO, Portugal
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch and Flywheel combo setup for Gsr 400hp range
What's the point if you aren't gonna drive it hard?
And no the stock clutch won't hold up to that kind of torque.
And no the stock clutch won't hold up to that kind of torque.
#5
Honda-Tech Member
Re: Clutch and Flywheel combo setup for Gsr 400hp range
Ive been reading through lots of threads and im down to a Exedy flywheel b/c its steel and i think that is safer then aluminum F1 and others.
As for the clutch im a little torn b/c there are so many i want one that has the oem feel b/c ill never be taking it to the strip and its a daily driver that will never be abused but i don't want any slip in case im hitting 20psi boost and it will be close to 400-450hp i suspect after tune on built gsr motor.
1. Exedy Stage II
2. Clutchmasters FX400
3.stage 3 Comp Clutch
Which do you guys recommend and have had the most success with.
Thanks
As for the clutch im a little torn b/c there are so many i want one that has the oem feel b/c ill never be taking it to the strip and its a daily driver that will never be abused but i don't want any slip in case im hitting 20psi boost and it will be close to 400-450hp i suspect after tune on built gsr motor.
1. Exedy Stage II
2. Clutchmasters FX400
3.stage 3 Comp Clutch
Which do you guys recommend and have had the most success with.
Thanks
Trending Topics
#9
Honda-Tech Member
Join Date: May 2006
Location: Dublin or MN
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch and Flywheel combo setup for Gsr 400hp range
Thread
Thread Starter
Forum
Replies
Last Post