blows oil through dipstick
#2
Join Date: May 2004
Location: Stroudsburg, PA, 18360
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
your presurezing the crank case. Do you have a breather? if you do, you are getting massive amounts of blow by. i fear your rings/ringlands a warm crispy pieaces of bread.
#4
Junior Member
Thread Starter
Join Date: Nov 2004
Location: ft worth, tx, usa
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
it does it after a few seconds of any amount of boost. and yes i have breather valve on. I dont think it has massive blow by because it doesnt shoot burnt oil through the valve cover at idle or when i rev it up. its wierd.
#5
Junior Member
Join Date: Aug 2004
Location: Copperas Cove, TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Re: (turbo_b16_ex)
Are you talking about a breather on the valve cover?? You should be venting the crankcase itself. The endyn kit seems to work perfect IMO, although I have had people have problems with it, maybe install error?
#7
Junior Member
Join Date: Aug 2004
Location: Copperas Cove, TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Re: (turbo_b16_ex)
http://www.theoldone.com/components/breather/
Works exactly how it reads, Stan at fast-turbo usually has these in stock, quick shipping b/c he's local to us.
Some people will tell you not to buy it b/c it's over $100. They say you can get the same fittings for the block from honda, I think a prelude part no. or something. But they are not the same as the endyne ones, which are modified to prevent oil from filling the can.
Works exactly how it reads, Stan at fast-turbo usually has these in stock, quick shipping b/c he's local to us.
Some people will tell you not to buy it b/c it's over $100. They say you can get the same fittings for the block from honda, I think a prelude part no. or something. But they are not the same as the endyne ones, which are modified to prevent oil from filling the can.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Nov 2004
Location: ft worth, tx, usa
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
that seams very similiar to a oil catch can. It states that it is used to catch VAPORS not a **** load of oil lol. i just dont know what the **** to do. my b16 did the same thimng. Im thinking that I have internal problems with my engine, not something that that kind of product is going to fix. There are plenty of people running much more boost than I do and do not have this problem. Im only running 8 psi with the POS ss autochrome turbo, so its that much cfm in there.
Thread
Thread Starter
Forum
Replies
Last Post
jdmtiiteyo
Forced Induction
9
01-01-2008 06:40 PM
the.hamburglar
Forced Induction
101
08-31-2007 08:52 PM
Dr Pooface
Forced Induction
38
09-26-2006 08:36 AM