RyanA

Just curious if there is a plugin for Crome Pro to use the ELD (0-5 volt) input instead of the narrowband (0-3.8 volt) input on the ECU?

Ryan

downest

I asked about this a while back and got no solution for it. Kinda sucks because of the huge difference between the actual signal and what Crome sees.

98vtec

to my knowledge, there is no ELD or any 5volt input.

.5 - 3.5v is what i recalibrated my LC1 to and set the same voltages in crome. Reads perfect.

You may want to look into the TunerTee if you have an Innovate wideband.

RyanA

I'll use either a PLX or an AEM that I have laying around. I'm putting the PLX M300 on for right now.

On Hondata and some other software, you are able to switch the ELD input (0-5 volt input) to use as your O2 sensor input instead of the regular NB input. Doesn't look like there is a script out there right now so I'll use the regular NB input.

Ryan

calvinPGMFI

a coder can do it quickly with a rom patch..
ENABLE ELD WIDEBAND|DISABLE ELD WIDEBAND...

ask some coders on pgmfi forum.. only 2 bytes should be flipped.

RyanA

Thanks, Calvin!