s300 tuning questions
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
s300 tuning questions
while tuning my injector (ms) turned red around 5000 rpm, however the duty cycle is around 70 %. what exactly do these mean?
also my MAP reads 0.0 to -0.7 at some areas and also turns red. is this an issue?
also my MAP reads 0.0 to -0.7 at some areas and also turns red. is this an issue?
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Re: s300 tuning questions
i know i can ,
What i am asking is if using the factory defaults, does that mean that my injectors are maxing out ?
cant what does the reading od the MAP mean?
What i am asking is if using the factory defaults, does that mean that my injectors are maxing out ?
cant what does the reading od the MAP mean?
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Re: s300 tuning questions
ok cool, so the only injector reading i should really be concerned with is the duty cycle?
and yeh my max value was 10, so when it got over that then it went red, my max injector (ms) value is 15.07
and yeh my max value was 10, so when it got over that then it went red, my max injector (ms) value is 15.07
Thread
Thread Starter
Forum
Replies
Last Post
85mmek9
Paint and Body
3
07-27-2010 12:41 PM