kissifur

Hello every one, i have 600-800 hp setup, i have precision 6766 t4 divided 1,32 ar, i have a skunk 2 pro 1 that eated rocker and themselfs, only in first cilinder EX, i send a few emails for skunk they do not respond, i have a race soon, can anybody tell me if i can use ctr ex cam with pro 1 Intake cam? I will loose many power with setup? I want to make 40 psi.

Thanks In advance

2k.civic.si

why not just run both the in and ex ctr cams?

kissifur

But with pro1 full setup make more power than ctr ones right?

rs250nut

What were the clearances set to? Don't **** around just use the type r cams, I'm sure they will make the hp you need.

sheepey

you bother checking if the LMA is bottoming out? That is NOT a cam problem, you either have LMA clearance issue or spring binding up...

V-SPEC 1

What motor oil are u using?

kissifur

Brad penn 10w40, i have almost 90 psi of oil pressure. I have supertech NA springs.